BAER HSSG Short Machine Tap Form B - M 18 x 2.5

€23.44*

Prices incl. VAT plus shipping costs

In stock

Same-day shipping for orders placed by tomorrow 11:50 o'clock

Express shipping is also possible for this product

Item no. 110201013
EAN 4058462024054
Product information

BAER HSSG Short Machine Tap Form B - M 18 x 2.5

Short machine taps allow you to cut a finished thread with just one tool in one step, even by hand. Exact internal thread can be cut by hand or semi-professionally by machine to save time.
Compared to the machine tap, the short machine tap has a short shank. This allows you to cut internal thread by hand without jamming and can be operated with tap wrenches, tool ratchets or other holding tools with square drive.
The thread can be cut in a pre-drilled core hole and does not require any preparatory work by a taper tap (No. 1) or intermediate tap (No. 2).
This internal tap clearly offers the price advantage over the hand tap set, as you no longer need two or three screw taps for thread cutting, but only one screw tap. Due to the high time saving in the process, the efficiency of the thread cutting is also significantly increased.
The tap can be used for through holes, as the long gate, the straight flutes and the spiral point ensure that the chip is transported forward out of the hole.

Dimensions

Diameter 18
Nominal diameter in inches 0,709
Nominal diameter in mm 18
Pitch 2,5
Pitch in mm 2,5
Dimension M 18 x 2,5

Characteristics

Product group Screw taps
Product type Short machine taps
Thread standard M: Metric ISO standard thread according to DIN 13
Tolerance ISO2/6H
Direction Right
Standard DIN 352
Tensile strength at room temperature up to 800 N/mm² | 22.2 HRC
Material HSSG bright

Core hole diameter: 15.5 mm
Core hole diameter
15.5 mm
Bild Lochtyp: https://media.baer.tools/media/vector/86/08/96/durchgangsloch.svg
Hole type
Through hole up to 4 x D
Bild Form: https://media.baer.tools/media/vector/89/22/a4/gewindebohrer_gerade_nuten_schaelanschnitt.svg
Form / Geometry
Form B with spiral point
Bild Anschnitt: https://media.baer.tools/media/vector/59/5d/26/gewindebohrer_anschnitt.svg
Chamfer
4-5 threads
Bild Spanabfuhr
Chip removal
Chips are removed downwards in the direction of cutting
Bild Kühlung: https://media.baer.tools/media/vector/41/a7/9a/gewindebohrer_aussenkuehlung.svg
Cooling
External cooling and lubrication
Bild Material: https://media.baer.tools/media/vector/c8/8d/2f/gewindebohrer_blank.svg
Material
HSSG bright
Bild Zugfestigkeit: https://media.baer.tools/media/vector/c0/4a/39/zugfestigkeit.svg
Tensile strength at room temperature
up to 800 N/mm² | 22.2 HRC
Tolerance: ISO2/6H
Tolerance
ISO2/6H

Applications

  • Materials with good machinability up to 800 N/mm²
  • Unalloyed and low-alloy steels

Technical drawing

D1 M 18 x 2,5
D2 14 mm
L1 95 mm
L2 40 mm
Diameter 18
Square 11 mm

Application – Sample materials for taps

Unalloyed construction steels
1.0035S185 (St33)
1.0036S235JRH
1.0038RSt37-2
1.0039S235JRG1+CR
1.0044St44-2
1.0060E335 (St60-2)
1.0116St37-3
1.0570St 52-3
Alloyed construction steels
1.541515Mo3
1.542316Mo5
1.562214Ni6
1.733513CrMo44
1.733716CrMo44
1.771514MoV63
Free-cutting steels
1.07119S20
1.07159SMn28
1.071811SMnPb30
1.072110S20
1.072315S20
1.072635S20
1.07379SMnPb36
1.075860SPb20
Case-hardening steels
1.0401(C15)
1.701617CR3
1.713116MnCr5
1.591915CrNi6
Quenched and tempered steels unalloyed
1.0402C 22
1.1151C22E (Ck22)
1.0503C 45
1.1191C45E (Ck45)
Cast steel
1.0420GS-38
1.5419GS-22 Mo 4
1.6750GS-20 NiCrMo3 7
1.7357 GS-17 CrMo 5 5
Malleable cast iron
0.8145EN-GJMB 450-6
0.8170EN-GJMB 700-2
0.8045EN-GJMW-450-7
0.8055EN-GJMW-550-4
Pure copper low-alloyed
2.0240CuZn15
2.0265CuZn30
Brass short-chipping
2.0401CuZn39Pb3
Brass long-chipping
2.0321CuZn37
2.0335CuZn36
2.0360CuZn40
Aluminum cast Si > 5-12 %
3.2161G-AlSi8Cu3
3.2163G-AlSi9Cu3
3.2381G-AlSi10Mg
3.2583G-AlSi12(Cu)
Lamellar graphite cast iron
0.6010EN-GJL 100 (GG-10)
0.6020EN-GJL 200 (GG -20)
0.6025EN-GJL 250 (GG-25)
0.6030EN-GJL 300 (GG -30)
Copper-tin alloy (bronze) short-chipping
2.1090.01G-CuSn7ZnPb
2.1086.01G-CuSn10Zn
2.1097G-CuSn5ZnPb
Pure copper, low-alloyed copper
2.0240CuZn15
2.0265CuZn30

Zubehör

HSSG 90° Countersink 31.0 mm (for M 16)
HSSG 90° Countersink 31.0 mm (for M 16)
Item no.: 745310
€34.82*
HSSE Extreme Drill Bit (reduced shank 13mm) 15.50 mm
HSSE Extreme Drill Bit (reduced shank 13mm) 15.50 mm
Item no.: 10155053
€74.49*
BAER Extension Sleeve for square 11mm | M 18
BAER Extension Sleeve for square 11mm | M 18
Item no.: 491925110
€12.30*
BAER Hexagon Die Nut M 18 x 2.5 - HSS
BAER Hexagon Die Nut M 18 x 2.5 - HSS
Item no.: 111501014
€34.34*
BAER Round Cutting Die M 18 x 2.5 - HSS
BAER Round Cutting Die M 18 x 2.5 - HSS
Item no.: 111401030
€25.04*
BAER High Performance Cutting Paste 100 ml
BAER High Performance Cutting Paste 100 ml
Item no.: SP100
€8.98*