-
Taps & Dies
-
Thread standards
- M - metric regular thread
- MF - metric fine thread
- G (BSP) - pipe thread
- UNC - American coarse thread
- UNF - American fine thread
- UNEF - amer. Extra fine thread
- UN - amer. with special pitch
- UNS - amer. with special pitch
- BSW - british coarse thread
- BSF - British fine thread
- Tr - trapezoidal thread
- Rd - knuckle thread
- NPT - amer. taper pipe thread
- NPTF - amer. taper pipe thread
- NPS - amer. cyl. pipe thread
- Rc (BSPT) - taper pipe thread
- Rp (BSPP) - cyl. pipe thread
- Vg - valve thread
- BA - brit. assn. Thread
- BSB - BSC - brit. std. thread
- W - taper gas cylinder valves
- Electrical and cable thread
- Bicycle and pedal thread
- Photo and C-Mount Thread
- Mini and nano threads (< 2mm)
- PG - steel conduit thread
- S - buttress thread
- RMS - microscope thread
- MJ, UNJC, UNJF - Aviation
- STI thread (thread inserts)
- Special thread
- Operating tools
- Lubricant
- Thread restoration tools
- Countersink
- Step drills
- Thread gauges
- External Deburring Tools
-
Thread standards
- BaerCoil/BaerFix
- Drill chucks
- Twist drill bits
STI and STI threads
Threads for thread inserts (EG) and STI threads (Screw Thread Insert) are designed specifically for fitting wire thread inserts to DIN 8140. The range includes EG screw taps and matching thread plug gauges for all common metric, imperial and pipe thread standards – providing the basis for standards-compliant thread repair and thread armoring.
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
Express in Germany
- Order by tomorrow, 14:00, estimated delivery Fri 20 Nov – Mon 23 Nov
- Express shipping within Germany: order by tomorrow, 13:00, delivery Fri 20 Nov
STI and EG Thread Inserts – Threads for Thread Inserts
The thread for thread inserts is needed solely for fitting thread inserts. There is not just one thread for thread inserts, but many variants, which are matched to common threads such as the metric M thread or the American UNC. In English it is known as the STI thread (Screw Thread Insert). Whether STI or EG, in the BAER online shop you will find the right screw taps for your needs.
Everything you need to know about the thread for thread inserts
Wire thread inserts are used to reinforce newly cut threads or to repair damaged threads. So that the reinforced thread has the required dimensions afterwards, the core hole is pre-cut oversize, as a standard screw tap would be too small. This is where specialised EG/STI screw taps come into use.
These taps cut a slightly larger receiving thread for the wire thread insert. Once fitted, the finished thread corresponds exactly to the specified nominal size. To tell them apart, the tools carry the marking EG. Example: M 2 × 0,4 EG produces the receiving thread; after the insert is fitted you obtain M 2 × 0,4.
Thread for thread inserts – our range
Always choose the screw tap to match the original type of thread. Our range covers numerous standards and dimensions. All tools are precision-made from high-quality materials for the best results.
Metric threads for thread inserts M‑EG and MF‑EG
For the metric regular thread M (60°) we offer: M‑EG short machine taps (hand/machine, single pass), M‑EG machine screw taps (for blind and through holes), M‑EG combination screw taps (no separate core hole drilling needed) and M‑EG forming taps (chipless, by material displacement).
For the metric fine thread MF you can choose MF‑EG short machine taps in HSSG (hand/machine) as well as MF‑EG machine screw taps in two versions for blind and through holes.
American threads for thread inserts UNC‑EG and UNF‑EG
For UNC/UNF we offer short machine taps (also suitable for purely manual use) and machine screw taps (fast, versatile across materials; for blind and through holes).
British threads for thread inserts BSW‑EG, BSF‑EG and BA‑EG
For the British coarse thread BSW and fine thread BSF (each 55°) we stock precision short machine taps. The BA‑EG (47,5°) is also covered with high-quality HSSG short machine taps.
Threads for thread inserts in pipe threads: G pipe EG and NPT‑EG
For the British pipe thread G (55°) we offer G pipe EG short machine taps in HSSG. For the American conical pipe thread NPT you will find matching NPT‑EG short machine taps.
Thread gauges for the metric thread for thread inserts
Special M‑EG thread gauges are used for quality inspection. They check the gauge conformity of the receiving thread (not of the finished thread). On request we calibrate the gauge in-house; simply add the calibration to your order.
Discover tools and accessories for the thread for thread inserts in the BAER online shop now!
Perfect thread repair is achieved with the right EG/STI screw taps. You will find these and many other accessories in the BAER online shop. Our customer service team is happy to answer any questions by phone or via the contact form.
Do you have any questions? We have the answers!
You'll quickly find the right answers in our FAQ - take a look!