BaerCoil Wire Thread Inserts BSF 1“ x 10 - 2.0 D (50.8 mm) - free running - 10 pcs.
BaerCoil Wire Thread Inserts BSF 1“ x 10 - 2.0 D (50.8 mm) - free running - 10 pcs.
BaerCoil® wire thread inserts provide a durable and powerful threaded connection in the thread repair. The inserts also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight construction and aerospace. BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful threaded connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight constructions as well as in aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly more stable than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread, even in lightweight constructions. Today, they are already an important component in aviation and vehicle construction.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
1" |
|---|---|
| Pitch |
10 |
| Dimension |
BSF 1" x 10 |
| Length |
2,0 D |
| T (Length when installed) |
50,8 mm |
| Thread length calculation |
2.0 D means 2 times the diameter: 2 times 25.4 mm=50.8 mm The nominal diameter for BSF 1" is approx. 25.4 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
BSF: British Whitworth fine thread according to BS 84 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
1" |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
50,8 mm |
| F (Min. - Max. outside diameter of thread insert) |
1,119 '' - 1,220 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
2,350 '' |
| D (minimum depth of the core hole, without tip) |
2,450 '' |
Video instructions
Further information
Product data sheet
Zubehör
