BAER HSSG Bit Tap M 6 x 1.0
€5.26*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BAER HSSG Bit Tap M 6 x 1.0
BAER Bit taps are designed for thread cutting with cordless screw drivers and hand drilling machines with clockwise and anti-clockwise rotation. However, they are also suitable for thread cutting by hand and on stationary drilling machines. Your cordless screw driver should have a power of at least 7.5 volts. Make sure that the tool axis and hole axis are exactly aligned and use a suitable cutting oil. For thread cutting with cordless screw drivers and hand drillig machines, we recommend the lowest speed settings (0 - 450 rpm) and maximum torque settings.
Dimensions
| Diameter |
6 |
|---|---|
| Nominal diameter in inches |
0,236 |
| Nominal diameter in mm |
6 |
| Pitch |
1,0 |
| Pitch in mm |
1 |
| Dimension |
M 6 x 1,0 |
Characteristics
| Product group |
Screw taps |
|---|---|
| Product type |
Bit taps/Combined bit taps |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Standard |
Factory standard |
| Tensile strength at room temperature |
up to 900 N/mm² | 27.1 HRC |
| Material |
HSSG bright |
5 mm
Through hole and blind hole up to 2 x D
Form D straight fluted
3.5-5 threads
Rarely occurs. Chips remain in flutes.
External cooling and lubrication
HSSG bright
up to 900 N/mm² | 27.1 HRC
ISO2/6H
Applications
Steel, non-ferrous metals and plastics up to 600 N/mm² tensile strength
Technical drawing
| D1 |
M 6 x 1,0 |
|---|---|
| L1 |
39 mm |
| L2 |
18 mm |
| Diameter |
6 |
Further information
- M - Metric ISO thread DIN 13
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Comparison inch-mm
- Surface treatments on tapping tools
- Cutting speeds and lubrication/cooling
- Information about tapping
- Material table
Zubehör
