BAER Round Cutting Die M 7 x 1.0 - HSS for Brass
BAER Round Cutting Die M 7 x 1.0 - HSS for Brass
BAER thread cutting dies are threading tools that are perfect for external threads. Basically, this cutting tool is cylindrical and - depending on the size - has three or more cutting edges inside. The holes between the cutting edges take up the chips, roll them and carry them away. Dies are commonly used in everyday life to make screws, nuts and threaded rods. The die holder is used to cut the threads by hand and the special die holders also allow you to attach the round die to a tailstock or drill. The dies can usually be used on both sides and have a perfect cut. Brass is picky when it comes to cutting. When using normal taps, there is a risk of built-up edge. That is why these BAER external taps are specially designed for brass. The quality tool ensures optimum chip removal with the spiral point (spiral entry) in combination with the lapped and particularly smooth surface. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste.
Dimensions
| Height H |
9 mm |
|---|---|
| Diameter |
7 |
| Nominal diameter in inches |
0,276 |
| Nominal diameter in mm |
7 |
| Pitch |
1,0 |
| Pitch in mm |
1 |
| Dimension |
M 7 x 1,0 |
Characteristics
| Product group |
Round cutting die |
|---|---|
| Product type |
Round cutting dies |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO-6g |
| Direction |
Right |
| Standard |
DIN 223 (DIN EN 2256 |
| Type |
lapped |
| Material |
HSS |
Technical information - Cutting dies
with spiral entry (spiral point)
1,25
HSS
ISO-6g
Applications
- Brass short-chipping Ms 58
- Brass long-chipping Ms 60
- Examples: CuZn39Pb2; CuZn40Pb2; CuZn20; CuZn37
Technical drawing
| Bolt pre-cutting diameter D2 |
6,88 mm |
|---|---|
| Height H |
9 mm |
| Outside diameter D1 |
20 mm |
| Dimension Diameter D |
M 7 x 1,0 |
| Diameter |
7 |
