BAER solid carbide Machine Tap Form D - M 12 x 1.75
BAER solid carbide Machine Tap Form D - M 12 x 1.75
Our machine taps are powerful and reliable taps for efficient machining in one step with the machine. Machine taps are used especially in industrial manufacturing. They can be used in CNC machines, thread cutting machines, cordless drills and pneumatic tapping arms, among others. As they are characterised by high efficiency and low production costs, they are often used in series production. The thread is cut by machine in one operation. Thus, although the BAER machine tap can basically be compared to short machine tap, it is designed for use with the machine.
The machine tap can be used for through holes and for blind holes, as the short chamfer-in and the straight flutes ensure that the chip remains in the flutes and is not transported away.
Every material shows individual chip behaviour. Therefore, screw taps must have the correct rake angle and - for even better results - a specially treated surface. This is the only way to achieve a good chip transport and to produce a thread that is true to gauge.
The high quality of the solid carbide we use ensures that our tools are extremely durable and robust. This increases the toughness and stability of the screw taps, allowing them to remain in use for longer.
Dimensions
| Diameter |
12 |
|---|---|
| Nominal diameter in inches |
0,472 |
| Nominal diameter in mm |
12 |
| Pitch |
1,75 |
| Pitch in mm |
1,75 |
| Dimension |
M 12 x 1,75 |
Characteristics
| Product group |
Screw taps |
|---|---|
| Product type |
Machine taps |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Standard |
Factory standard |
| Tensile strength at room temperature |
up to 62 HRC |
| Material |
Solid carbide bright |
10.4 mm
Through hole and blind hole up to 1.5 x D
Form D straight fluted
3.5-5 threads
Rarely occurs. Chips remain in flutes.
External cooling and lubrication
Solid carbide bright
up to 62 HRC
ISO2/6H
Applications
alloy steels, hardness 44-62 HRC
Technical drawing
| D1 |
M 12 x 1.75 |
|---|---|
| D2 |
12 mm |
| L1 |
110 mm |
| L2 |
28 mm |
| Diameter |
12 |
| Square |
9 mm |
Application – Sample materials
| Quenched and tempered bearing steels, tool steels for hot work | Cutting speed vc in m/min | |
|---|---|---|
| 1.3505 | 100Cr6 | 1-2 |
| 1.2767 | 45NiCrMo16 | 2-3 |
| 1.2343 | X38CrMoV5-1 | 2-3 |
| 1.2581 | X30WCrV9-3 | 2-3 |
Cutting speed vc [m/min] = (Outer diameter * π * speed) / 1000
Rotation speed n [1/min] = (Cutting speed in m/min * 1000) / (Outer diameter * π)
Feedrate programming [mm/min] = speed * pitch
Please note that the above cutting speeds are indicative and must be adjusted depending on lubrication and actuation.
Further information
- M - Metric ISO thread DIN 13
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Comparison inch-mm
- Surface treatments on tapping tools
- Cutting speeds and lubrication/cooling
- Information about tapping
- Material table
