Carbide External Deburring Tool 3 - 19 mm
En stock
- Commandez avant demain, 14:00
- Expédition demain
- Livraison estimée jeu. 19 nov. – ven. 20 nov.
- Livraison express en Allemagne : commandez avant demain, 13:00, livraison jeu. 19 nov.
Carbide External Deburring Tool 3 - 19 mm
The BAER carbide external deburring tool removes burrs from cut-to-length screws, threaded rods, bolts, round bar and tubes, and puts a clean chamfer on the edge in the same operation. One tool covers all outside diameters from 3 to 19 mm, corresponding to the metric regular threads M3 to M18.
Three carbide cutting edges in a self-centering funnel produce an even chamfer on which the nut engages immediately. The 1/4" hexagon shank with groove fits drill chucks and bit holders of cordless drills and drilling machines. Suitable for steel, stainless steel, brass, copper, aluminium and plastic.
Dimensions
| Diamètre |
3 - 19 mm |
|---|---|
| Dimension |
3 - 19 mm |
Caractéristiques
| Direction |
A droite |
|---|---|
| Groupe de produits |
Außenentgrater |
| Matériel |
Hartmetall |
| Type de produit |
Außenentgrater |
Applications
- For deburring and chamfering screws, threaded rods, bolts, round bar and tubes
- For outside diameters from 3 to 19 mm (metric M3 to M18)
- For steel, stainless steel, brass, copper, aluminium and plastic
- For use with a cordless drill or drilling machine at low rotational speed, in a drill chuck or 1/4\" bit holder
Caractéristiques
| Working range | Ø 3 - 19 mm |
|---|---|
| Metric regular thread | M3 to M18 |
| Number of cutting edges | 3 |
| Shank | 1/4\" (6.35 mm) hexagon with groove |
| Suitable for | Drill chuck and 1/4\" bit holder |
| Rotational speed | up to approx. 400 rpm |
Dessin technique
| D1 |
29 mm |
|---|---|
| D2 |
1/4 |
| Diamètre |
3 - 19 mm |
| L1 |
52 mm |
| L2 |
23 mm |
Consignes de sécurité
Se connecter