BaerCoil Wire Thread Inserts BSF 7/8 x 11 - 3.0 D (66.68 mm) - free running - 25 pcs.
BaerCoil Wire Thread Inserts BSF 7/8 x 11 - 3.0 D (66.68 mm) - free running - 25 pcs.
BaerCoil® wire thread inserts provide a durable and powerful threaded connection in the thread repair. The inserts also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight construction and aerospace. BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful threaded connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight constructions as well as in aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly more stable than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum force transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
Diameter |
7/8 |
---|---|
Pitch |
11 |
Dimension |
BSF 7/8 x 11 |
Length |
3,0 D |
T (Length when installed) |
66,68 mm |
Thread length calculation |
3.0 D means 3 times the diameter: 3 times 22.23 mm=66.68 mm The nominal diameter for BSF 7/8 is approx. 22.23 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSF: British Whitworth fine thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
7/8 |
---|---|
Length |
3,0 D |
T (Length when installed) |
66,68 mm |
F (Min. - Max. outside diameter of thread insert) |
0,983 '' - 1,074 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
2,943 '' |
D (minimum depth of the core hole, without tip) |
3,034 '' |