BaerCoil Wire Thread Inserts BSW 7/8 x 9 - 1.5 D (33.34 mm) - free running - 10 pcs.
€64.77*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts BSW 7/8 x 9 - 1.5 D (33.34 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the best solution for all your repair needs! With them you can create long-lasting and powerful connections. These inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly stronger than the original thread.
Our thread inserts ensure that both static and dynamic work loads are distributed in a balanced way to the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angular errors, so that optimum force transmission from the bolt to the nut thread is achieved. Especially in lightweight constructions, BaerCoil® thread inserts help to reduce the carrier material and to use smaller or shorter screw connections. Today, they are already an important component in aviation and vehicle construction. They significantly save material and contribute to the conservation of resources.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
7/8 |
|---|---|
| Pitch |
9 |
| Dimension |
BSW 7/8 x 9 |
| Length |
1,5 D |
| T (Length when installed) |
33,34 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 22.23 mm=33.34 mm The nominal diameter at BSW 7/8 is approx. 22.23 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
BSW: British Whitworth standard thread according to BS 84 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
7/8 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
33,34 mm |
| F (Min. - Max. outside diameter of thread insert) |
1,006 '' - 1,051 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
1,701 '' |
| D (minimum depth of the core hole, without tip) |
1,812 '' |
Video instructions
Further information
Product data sheet
Zubehör
