BaerCoil Wire Thread Inserts M 2.5 x 0.45 - 1.5 D (3.75 mm) - free running - 100 pcs.
€30.43*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 2.5 x 0.45 - 1.5 D (3.75 mm) - free running - 100 pcs.
BaerCoil® thread inserts are the best solution for your thread repair! With them you can create long-lasting and powerful threaded connections. The inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. STI thread (screw thread insert) is cut and the BaerCoil® insert is screwed in. The thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are essential for optimum force transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced way to the individual threads. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
2,5 |
|---|---|
| Pitch |
0,45 |
| Dimension |
M 2,5 x 0,45 |
| Length |
1,5 D |
| T (Length when installed) |
3,75 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 2.5 mm=3.75 mm The nominal diameter for M 2.5 is 2.5 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
2,5 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
3,75 mm |
| F (Min. - Max. outside diameter of thread insert) |
3,04 mm - 3,70 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
5,33 mm |
| D (minimum depth of the core hole, without tip) |
5,78 mm |
Video instructions
Further information
Product data sheet
Zubehör
