BaerCoil Wire Thread Inserts M 9 x 1.0 - 1.5 D (13.5 mm) - free running - 10 pcs.
€12.57*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 9 x 1.0 - 1.5 D (13.5 mm) - free running - 10 pcs.
BaerCoil® wire thread inserts provide a long-lasting, powerful connection and scrap recovery in the thread repair. They also create load-bearing connections in materials with low shear strength. Precise and wear-resistant, the inserts hold your screw firmly in place without deforming the thread insert. Ideal for repairing damaged or worn threads. wire thread inserts are often used in areas such as automotive, electrical engineering, medical technology or lightweight construction as well as in aerospace.
For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. This thread is often also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum power transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
9 |
|---|---|
| Pitch |
1,0 |
| Dimension |
MF 9 x 1,0 |
| Length |
1,5 D |
| T (Length when installed) |
13,5 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 9 mm=13.5 mm The nominal diameter for MF 9 is 9 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
9 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
13,5 mm |
| F (Min. - Max. outside diameter of thread insert) |
10,17 mm - 11,23 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
17,00 mm |
| D (minimum depth of the core hole, without tip) |
18,00 mm |
Video instructions
Further information
Product data sheet
Zubehör
