BaerCoil Wire Thread Inserts M 24 x 1.5 - 3.0 D (72 mm) - free running - 25 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 24 x 1.5 - 3.0 D (72 mm) - free running - 25 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread. The flexibility of the thread inserts compensates for any pitch and angular errors so that the loads are distributed in a balanced manner over the individual thread turns. BaerCoil® thread inserts are ideal for lightweight constructions, as they reduce the carrier material and enable smaller or shorter screw connections. Today, they are already an important component in aviation and vehicle construction.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
24 |
|---|---|
| Pitch |
1,5 |
| Dimension |
MF 24 x 1,5 |
| Length |
3,0 D |
| T (Length when installed) |
72 mm |
| Thread length calculation |
3.0 D means 3 times the diameter: 3 times 24 mm=72 mm The nominal diameter for MF 24 is 24 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
24 |
|---|---|
| Length |
3,0 D |
| T (Length when installed) |
72 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
