BaerCoil Wire Thread Inserts M 42 x 4.0 - 1.5 D (63 mm) - free running - 5 pcs.
€421.58*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 42 x 4.0 - 1.5 D (63 mm) - free running - 5 pcs.
BaerCoil® wire thread inserts provide a long-lasting and powerful thread connection and scrap recovery in the thread repair. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant and hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are commonly used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads. STI thread (screw thread insert) is cut and the BaerCoil® insert is screwed in. The thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are essential for optimum force transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced way to the individual threads. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
42 |
|---|---|
| Pitch |
4,0 |
| Dimension |
MF 42 x 4,0 |
| Length |
1,5 D |
| T (Length when installed) |
63 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 42 mm=63 mm The nominal diameter for MF 42 is 42 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
42 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
63 mm |
| F (Min. - Max. outside diameter of thread insert) |
47,10 mm - 49,00 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
78,75 mm |
| D (minimum depth of the core hole, without tip) |
83,25 mm |
Video instructions
Further information
Product data sheet
Zubehör
