BaerCoil Wire Thread Inserts UNC No. 3 x 48 - 3.0 D (7.54 mm) - free running - 100 pcs.
BaerCoil Wire Thread Inserts UNC No. 3 x 48 - 3.0 D (7.54 mm) - free running - 100 pcs.
BaerCoil® thread inserts are the best solution for all your repair needs! With them you can create long-lasting and powerful connections. These inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads while maintaining the same nominal diameter. With BaerCoil® thread inserts, the manufactured thread is significantly stronger than the original thread.
BaerCoil® thread inserts ensure that both static and dynamic work loads are evenly distributed over the individual thread turns. Also, the flexibility of the ® thread inserts compensates for any pitch and angular errors, so that optimum force transmission from the bolt to the nut thread is achieved.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
No. 3 |
|---|---|
| Pitch |
48 |
| Dimension |
UNC No. 3 x 48 |
| Length |
3,0 D |
| T (Length when installed) |
7,54 mm |
| Thread length calculation |
3.0 D means 3 times the diameter: 3 times 2.51 mm=7.54 mm The nominal diameter at UNC No. 3 is approx. 2.51 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
UNC: American Unified National Coarse thread according to ANSI B1.1 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
No. 3 |
|---|---|
| Length |
3,0 D |
| T (Length when installed) |
7,54 mm |
| F (Min. - Max. outside diameter of thread insert) |
0,124 '' - 0,139 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
0,370 '' |
| D (minimum depth of the core hole, without tip) |
0,391 '' |
Video instructions
Further information
Product data sheet
Zubehör
