BAER Set HSSG: Short Machine Taps | cutting dies | drill bits: UNF 1/4 - 1/2
BAER Set HSSG: Short Machine Taps | cutting dies | drill bits: UNF 1/4 - 1/2
This tap set is a high quality and versatile set for all thread cutting needs. The inch taps from UNF 1/4" to UNF 1/2" allow cutting of internal and external threads.
The set includes core drill bit and hand taps for through holes and blind holes made of ground HSS steel (High Speed Steel), which ensures long durability and high precision. HSS taps are also included in the set so that you can also cut external threads without any problems.
The thread cutting assortment is supplied in a sturdy plastic box. The compartments for the taps provide a secure hold and transport protection and at the same time all the tools are clearly within reach.
The tools themselves are characterised by the highest quality. They are optimally processed and guarantee long durability as well as high precision at thread cutting. In summary, this tap set offers an excellent solution for anyone who wants to cut threads. The combination of high-quality tools and a sturdy plastic box makes it an optimal choice for professionals and DIY enthusiasts alike. Invest in quality and experience the benefits of a professional tap set. A tap set that everyone needs in their workshop.
Dimensions
| Diameter |
1/4 - 1/2" |
|---|---|
| Dimension |
UNF 1/4 - 1/2" |
Characteristics
| Product group |
threading tool sets |
|---|---|
| Product type |
Threading tool sets |
| Thread standard |
UNF: American Fine Unified National thread according to ANSI B1.1 |
| Tolerance |
2B |
| Direction |
Right |
| Tensile strength at room temperature |
up to 800 N/mm² | 22.2 HRC |
| Material |
HSSG bright |
Technical information – Screw taps
Through hole and blind hole up to 4 x D
Form D straight fluted
3-4 threads
see illustration
External cooling and lubrication
HSSG bright
up to 800 N/mm² | 22.2 HRC
2B
Technical information - Cutting dies
1,5
2A
Set content
| BAER HSSG short machine tap | UNF 1/4 x 28 | UNF 5/16 x 24 | UNF 3/8 x 24 UNF 7/16 x 20 | UNF 1/2 x 20 |
|---|---|
| BAER HSS round die | UNF 1/4 x 28 | UNF 5/16 x 24 | UNF 3/8 x 24 UNF 7/16 x 20 | UNF 1/2 x 20 |
| BAER HSSG core drill bit | 5,5 mm | 6,9 mm | 8,5 mm | 9,9 mm | 11,5 mm |
Applications
- General-purpose use
- Materials with good machinability up to 800 N/mm²
- Unalloyed and low-alloy steels
- for through hole and blind hole
- for manual use
Application – Sample materials for taps
| Unalloyed construction steels | |
|---|---|
| 1.0035 | S185 (St33) |
| 1.0036 | S235JRH |
| 1.0038 | RSt37-2 |
| 1.0039 | S235JRG1+CR |
| 1.0044 | St44-2 |
| 1.0060 | E335 (St60-2) |
| 1.0116 | St37-3 |
| 1.0570 | St 52-3 |
| Alloyed construction steels | |
|---|---|
| 1.5415 | 15Mo3 |
| 1.5423 | 16Mo5 |
| 1.5622 | 14Ni6 |
| 1.7335 | 13CrMo44 |
| 1.7337 | 16CrMo44 |
| 1.7715 | 14MoV63 |
| Free-cutting steels | |
|---|---|
| 1.0711 | 9S20 |
| 1.0715 | 9SMn28 |
| 1.0718 | 11SMnPb30 |
| 1.0721 | 10S20 |
| 1.0723 | 15S20 |
| 1.0726 | 35S20 |
| 1.0737 | 9SMnPb36 |
| 1.0758 | 60SPb20 |
| Case-hardening steels | |
|---|---|
| 1.0401 | (C15) |
| 1.7016 | 17CR3 |
| 1.7131 | 16MnCr5 |
| 1.5919 | 15CrNi6 |
| Quenched and tempered steels unalloyed | |
|---|---|
| 1.0402 | C 22 |
| 1.1151 | C22E (Ck22) |
| 1.0503 | C 45 |
| 1.1191 | C45E (Ck45) |
| Cast steel | |
|---|---|
| 1.0420 | GS-38 |
| 1.5419 | GS-22 Mo 4 |
| 1.6750 | GS-20 NiCrMo3 7 |
| 1.7357 | GS-17 CrMo 5 5 |
| Malleable cast iron | |
|---|---|
| 0.8145 | EN-GJMB 450-6 |
| 0.8170 | EN-GJMB 700-2 |
| 0.8045 | EN-GJMW-450-7 |
| 0.8055 | EN-GJMW-550-4 |
| Pure copper low-alloyed | |
|---|---|
| 2.0240 | CuZn15 |
| 2.0265 | CuZn30 |
| Brass short-chipping | |
|---|---|
| 2.0401 | CuZn39Pb3 |
| Brass long-chipping | |
|---|---|
| 2.0321 | CuZn37 |
| 2.0335 | CuZn36 |
| 2.0360 | CuZn40 |
| Aluminum cast Si > 5-12 % | |
|---|---|
| 3.2161 | G-AlSi8Cu3 |
| 3.2163 | G-AlSi9Cu3 |
| 3.2381 | G-AlSi10Mg |
| 3.2583 | G-AlSi12(Cu) |
| Lamellar graphite cast iron | |
|---|---|
| 0.6010 | EN-GJL 100 (GG-10) |
| 0.6020 | EN-GJL 200 (GG -20) |
| 0.6025 | EN-GJL 250 (GG-25) |
| 0.6030 | EN-GJL 300 (GG -30) |
| Copper-tin alloy (bronze) short-chipping | |
|---|---|
| 2.1090.01 | G-CuSn7ZnPb |
| 2.1086.01 | G-CuSn10Zn |
| 2.1097 | G-CuSn5ZnPb |
| Pure copper, low-alloyed copper | |
|---|---|
| 2.0240 | CuZn15 |
| 2.0265 | CuZn30 |
Further information
- UNF - Unified National Fine Thread Series ANSI B1.1 American fine thread
- Information about tapping
- Comparison inch-mm
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Cutting speeds, lubrication and cooling for taps
- Thread tolerances of external threads
- Bolt pre-machining diameter
Safety instructions
BAER HSSG short machine tap
for through-hole and blind hole | UNF 1/4" - UNF 1/2" thread
Cutting a finished thread with just one tool in one operation, even by hand - is that possible? Yes, the short machine tap makes efficient production of internal threads possible. Whether by hand or semi-professionally by machine, this internal tap with full thread profile cuts precisely and saves time. At the same time, it cuts precisely and straight into the core hole - an absolute must when drilling threads. BAER short machine taps are suitable for general use in easily machinable materials up to 800 N/mm². These include unalloyed and low-alloy steels, free-cutting steels and cast steel. They cut a through-hole and blind hole up to 2 x D and are suitable for hand and machine use.
The advantages at a glance:
- Thread cutting with one tool
- precise and time-saving
- for hand and machine use
- Use in materials with good machinability up to 800 N/mm²
- Through-hole and blind hole up to 2 x D
- Hand and machine use
Technical information:
- Form D: 3.5 - 5 threads chamfer
- Thread tolerance: ISO2/6H
HSSG short machine taps :
UNF 1/4 x 28 | UNF 5/16 x 24 | UNF 3/8 x 24 | UNF 7/16 x 20 | UNF 1/2 x 20
HSS thread cutting dies - for perfect external threads
#round runs
BAER dies are used to produce external threads with a round external profile. You want to operate it by hand or by machine? Both work. These BAER dies made of high speed steel HSS are suitable for normal applications for various materials with a strength of up to 800 N/mm². These include the following materials: general structural steels, free-cutting steels, case-hardening steels, unalloyed heat-treatable steels, pure copper, low-alloyed copper and copper-tin alloy (bronze) short-chipping, as well as plastics. The symmetrical design allows cutting in both axial directions. There are holes on the outside, here you can fix the thread cutting die in the die stock and prevent it from twisting during use. The chip holes, which are holes or cavities between the cutting edges, provide the chip transport. They take up the chips, roll them and carry them away. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste. Our thread cutting dies for external threads can convince primarily with excellent quality in addition to a fair price. BAER cutting dies - for perfect external threads.
The advantages at a glance:
- little space required
- Adjustment without effort
- Use on simple and multi-spindle machines
- simple tool assembly
- Use from both sides
Technical information:
- DIN EN 22568 (formerly DIN 223 B)
- Thread tolerance: 2A
- Gate: 1,5
HSS thread cutting dies DIN 223 :
UNF 1/4 x 28 | UNF 5/16 x 24 | UNF 3/8 x 24 | UNF 7/16 x 20 | UNF 1/2 x 20
HSSG twist drill bit for core hole drilling
#You can't do without it
Almost every do-it-yourselfer has worked with them: the classic drilling tools for cordless screwdrivers, drills, impact drills or hammer drills. Decisive for the field of application of the drill is not only the material, but also the cutting edge geometry, the rake angle and the spiral angle, the so-called twist. The drills are suitable for steel, cast steel, grey cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver and graphite and are also suitable for precise and fast work due to their ground drill point. The core hole drillings are essential for cutting a internal thread afterwards.
HSSG core drill bit DIN 338 for UNF 1/4 - UNF 1/2:
Ø 5.5 mm (UNF 1/4 x 28) | Ø 6.9 mm (UNF 5/16 x 24) | Ø 8.5 mm (UNF 3/8 x 24)| Ø 9.9 mm (UNF 7/16 x 20) | Ø 11.5 mm (UNF 1/2 x 20)
