BaerCoil Wire Thread Inserts BSF 3/4 x 12 - 2.5 D (47.63 mm) - free running - 50 pcs.
BaerCoil Wire Thread Inserts BSF 3/4 x 12 - 2.5 D (47.63 mm) - free running - 50 pcs.
BaerCoil® wire thread inserts are the perfect solution for a durable, powerful threaded connection and With the BaerCoil® wire thread inserts you create perfect, durable and powerful threaded connections. At the same time, the use of wire thread inserts allows for scrap recovery and load-bearing connections in materials with low shear strength. Therefore, wire thread inserts is often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened to the required length with a side cutter or similar.
Dimensions
Diameter |
3/4 |
---|---|
Pitch |
12 |
Dimension |
BSF 3/4 x 12 |
Length |
2,5 D |
T (Length when installed) |
47,63 mm |
Thread length calculation |
2.5 D means 2.5 times the diameter: 2.5 times 19.05 mm=47.63 mm The nominal diameter for BSF 3/4 is approx. 19.05 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSF: British Whitworth fine thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
3/4 |
---|---|
Length |
2,5 D |
T (Length when installed) |
47,63 mm |
F (Min. - Max. outside diameter of thread insert) |
0,849 '' - 0,925 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
2,167 '' |
D (minimum depth of the core hole, without tip) |
2,250 '' |