BaerCoil Wire Thread Inserts M 5 x 0.8 - 2.0 D (10 mm) - free running - 10 pcs.
€6.58*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 5 x 0.8 - 2.0 D (10 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the best solution for your thread repair! With them you can create long-lasting and powerful threaded connections. The inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
BaerCoil® thread inserts are the perfect solution for damaged threads. They are drilled out and a new STI thread (screw thread insert) is cut for the wire- thread insert. This thread is often also called STI thread (STI=Screw Thread Insert). Then the BaerCoil® thread insert is screwed into the old thread and thus the workpieces are screwed on again. With BaerCoil® thread inserts, the thread produced is significantly more stable than the original thread.
BaerCoil® thread inserts ensure that both static and dynamic work loads are distributed evenly over the individual thread turns. Also, the flexibility of the ® thread inserts compensates for any pitch and angular errors, so that optimum force transmission from the bolt to the nut thread is achieved.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
Diameter | 5 |
---|---|
Pitch | 0,8 |
Dimension | M 5 x 0,8 |
Length | 2,0 D |
T (Length when installed) | 10 mm |
Thread length calculation | 2.0 D means 2 times the diameter: 2 times 5 mm=10 mm The nominal diameter for M 5 is 5 mm |
Characteristics
Product group | Wire thread inserts |
---|---|
Product type | BaerCoil wire thread inserts |
Thread standard | M: Metric ISO standard thread according to DIN 13 |
Tolerance | ISO2/6H |
Direction | Right |
Type | free running |
Tensile strength at room temperature | >1400 N/mm² |
Material | Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance | 315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter | 5 |
---|---|
Length | 2,0 D |
T (Length when installed) | 10 mm |
F (Min. - Max. outside diameter of thread insert) | 5,94 mm - 6,80 mm |
P (depth) | The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) | 12,80 mm |
D (minimum depth of the core hole, without tip) | 13,60 mm |