BaerCoil Wire Thread Inserts M 12 x 1.25 - 1.5 D (18 mm) - free running - 10 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 12 x 1.25 - 1.5 D (18 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the perfect solution for your thread repair needs! These inserts provide a long-lasting and powerful thread connection and scrap recovery.
If you have damaged threads, the BaerCoil® thread insert is the perfect solution - while maintaining the same nominal diameter! By reaming and inserting a new EC thread, your old thread becomes strong and stable again. With the BaerCoil® thread insert your manufactured thread will be significantly stronger than the original thread!
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter | 12 |
|---|---|
| Pitch | 1,25 |
| Dimension | MF 12 x 1,25 |
| Length | 1,5 D |
| T (Length when installed) | 18 mm |
| Thread length calculation | 1.5 D means 1.5 times the diameter: 1.5 times 12 mm=18 mm The nominal diameter for MF 12 is 12 mm |
Characteristics
| Product group | Wire thread inserts |
|---|---|
| Product type | BaerCoil wire thread inserts |
| Thread standard | MF: Metric ISO fine thread according to DIN 13 |
| Tolerance | ISO2/6H |
| Direction | Right |
| Type | free running |
| Tensile strength at room temperature | >1400 N/mm² |
| Material | Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance | 315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter | 12 |
|---|---|
| Length | 1,5 D |
| T (Length when installed) | 18 mm |
| F (Min. - Max. outside diameter of thread insert) | 13,47 mm - 15,00 mm |
| P (depth) | The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) | 22,38 mm |
| D (minimum depth of the core hole, without tip) | 23,63 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
