BaerCoil Wire Thread Inserts M 11 x 1.25 - 1.5 D (16.5 mm) - free running - 10 pcs.
BaerCoil Wire Thread Inserts M 11 x 1.25 - 1.5 D (16.5 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the best solution for your thread repair! With them you can create long-lasting and powerful threaded connections. The inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear-resistant - your screw will stay firmly in place without slipping thread insert.
If you have damaged threads, the BaerCoil® thread insert is the perfect solution - while maintaining the same nominal diameter! By reaming and inserting a new EC thread, your old thread becomes strong and stable again. With the BaerCoil® thread insert your manufactured thread will be significantly stronger than the original thread!
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
11 |
|---|---|
| Pitch |
1,25 |
| Dimension |
MF 11 x 1,25 |
| Length |
1,5 D |
| T (Length when installed) |
16,5 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 11 mm=16.5 mm The nominal diameter for MF 11 is 11 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
11 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
16,5 mm |
| F (Min. - Max. outside diameter of thread insert) |
12,47 mm - 13,76 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
20,87 mm |
| D (minimum depth of the core hole, without tip) |
22,12 mm |
