BaerCoil Wire Thread Inserts M 12 x 1.75 - 2.0 D (24 mm) - free running - 100 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 12 x 1.75 - 2.0 D (24 mm) - free running - 100 pcs.
BaerCoil® thread inserts are the best solution for your thread repair! With them you can create long-lasting and powerful threaded connections. The inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads while maintaining the same nominal diameter. With BaerCoil® thread inserts, the manufactured thread is significantly stronger than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum force transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter | 12 |
|---|---|
| Pitch | 1,75 |
| Dimension | M 12 x 1,75 |
| Length | 2,0 D |
| T (Length when installed) | 24 mm |
| Thread length calculation | 2.0 D means 2 times the diameter: 2 times 12 mm=24 mm The nominal diameter for M 12 is 12 mm |
Characteristics
| Product group | Wire thread inserts |
|---|---|
| Product type | BaerCoil wire thread inserts |
| Thread standard | M: Metric ISO standard thread according to DIN 13 |
| Tolerance | ISO2/6H |
| Direction | Right |
| Type | free running |
| Tensile strength at room temperature | >1400 N/mm² |
| Material | Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance | 315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter | 12 |
|---|---|
| Length | 2,0 D |
| T (Length when installed) | 24 mm |
| F (Min. - Max. outside diameter of thread insert) | 14,03 mm - 15,00 mm |
| P (depth) | The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) | 30,13 mm |
| D (minimum depth of the core hole, without tip) | 31,88 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
