BaerCoil Wire Thread Inserts M 10 x 1.5 - 3.0 D (30 mm) - free running - 100 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 10 x 1.5 - 3.0 D (30 mm) - free running - 100 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. This thread is often also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum power transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter | 10 |
|---|---|
| Pitch | 1,5 |
| Dimension | M 10 x 1,5 |
| Length | 3,0 D |
| T (Length when installed) | 30 mm |
| Thread length calculation | 3.0 D means 3 times the diameter: 3 times 10 mm=30 mm The nominal diameter for M 10 is 10 mm |
Characteristics
| Product group | Wire thread inserts |
|---|---|
| Product type | BaerCoil wire thread inserts |
| Thread standard | M: Metric ISO standard thread according to DIN 13 |
| Tolerance | ISO2/6H |
| Direction | Right |
| Type | free running |
| Tensile strength at room temperature | >1400 N/mm² |
| Material | Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance | 315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter | 10 |
|---|---|
| Length | 3,0 D |
| T (Length when installed) | 30 mm |
| F (Min. - Max. outside diameter of thread insert) | 11,74 mm - 12,50 mm |
| P (depth) | The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) | 35,25 mm |
| D (minimum depth of the core hole, without tip) | 36,75 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
