BaerCoil Wire Thread Inserts UNF 5/8 x 18 - 2.5 D (39.69 mm) - free running - 50 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts UNF 5/8 x 18 - 2.5 D (39.69 mm) - free running - 50 pcs.
BaerCoil® wire thread inserts are the perfect solution for a durable, powerful threaded connection and With the BaerCoil® wire thread inserts you create perfect, durable and powerful threaded connections. At the same time, the use of wire thread inserts allows for scrap recovery and load-bearing connections in materials with low shear strength. Therefore, wire thread inserts is often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads and that at the same time nominal diameter. With BaerCoil® thread inserts, the thread produced is significantly more stable than the original thread.
BaerCoil® thread inserts are indispensable for optimal power transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced manner to the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
Diameter |
5/8 |
---|---|
Pitch |
18 |
Dimension |
UNF 5/8 x 18 |
Length |
2,5 D |
T (Length when installed) |
39,69 mm |
Thread length calculation |
2.5 D means 2.5 times the diameter: 2.5 times 15.88 mm=39.69 mm The nominal diameter for UNF 5/8 is approx. 15.88 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
UNF: American Fine Unified National thread according to ANSI B1.1 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
5/8 |
---|---|
Length |
2,5 D |
T (Length when installed) |
39,69 mm |
F (Min. - Max. outside diameter of thread insert) |
0,690 '' - 0,758 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
1,757 '' |
D (minimum depth of the core hole, without tip) |
1,812 '' |