BAER Round Cutting Die MF 10 x 0.5 - HSS - tolerance 6e
BAER Round Cutting Die MF 10 x 0.5 - HSS - tolerance 6e
The die is a reliable and durable tool that helps you to produce precise external threads in one operation. It is equipped with four holes and a V-groove that secure the die in matching die stock and holders. This allows you to handle the die safely and comfortably. The BAER round die is also perfect for use in a tailstock or chuck of a drill press. Dies are tools used for cutting screws, nuts and threaded rods in everyday life. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or drill press. The dies can usually be used on both sides and have a perfect cut. The external thread cutting tool is made of high-speed steel (HSS). HSS steel has a higher toughness and a lower susceptibility to breakage compared to HSSE steel. HSS steel is known for its exceptional cutting performance and durability. HSS cutting dies can be used for a wide range of applications, such as structural steels, carbon steels and free-cutting steels. It is also suitable for case-hardening steels and unalloyed tempering steels with a strength of up to 750 N/mm². Cast steel as well as zinc alloys can also be cut with it, as well as pure copper, low-alloy copper, as well as short-chipping copper-tin alloys, plastics such as POM, PVC, etc. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste.
Dimensions
Height H |
11 mm |
---|---|
Diameter |
10 |
Nominal diameter in inches |
0,394 |
Nominal diameter in mm |
10 |
Pitch |
0,5 |
Pitch in mm |
0,5 |
Dimension |
MF 10 x 0,5 |
Characteristics
Product group |
Round cutting die |
---|---|
Product type |
Round cutting dies |
Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
Tolerance |
6e Untermaß |
Direction |
Right |
Standard |
DIN 223 (DIN EN 2256 |
Material |
HSS |
Technical information - Cutting dies
1,75
HSS
6e Undersize
Applications
- Undersize- tolerance: for studs that receive a surface treatment or galvanic protective layer up to approx. 8 µm layer thickness. Dies with 6e- tolerance cut approx. 0.03 mm smaller than dies with standard tolerance 6g.
- General-purpose use up to 750 N/mm²
- general structural steels, free-cutting steels, case-hardening steels and unalloyed tempering steels
- Pure copper, low-alloyed copper, as well as short-chipping copper-tin-alloys
- Plastics such as POM, PVC etc.
Technical drawing
Height H |
11 mm |
---|---|
Outside diameter D1 |
30 mm |
Dimension Diameter D |
MF 10 x 0,5 |
Diameter |
10 |
Application – Sample materials for dies
General construction steels | |
---|---|
1.0035 | S185 (St33) |
1.0036 | S235JRH |
1.0039 | S235JRG1+CR |
1.0060 | E335 (St60-2) |
Free-cutting steels | |
---|---|
1.0718 | 11SMnPb30 |
1.0721 | 10S20 |
1.0726 | 35S20 |
1.0758 | 60SPb20 |
Case-hardening steels | |
---|---|
1.0401 | (C15) |
1.7016 | 17CR3 |
1.7131 | 16MnCr5 |
1.5919 | 15CrNi6 |
Quenched and tempered steels unalloyed | |
---|---|
1.0402 | C 22 |
1.1151 | C22E (Ck22) |
1.0503 | C 45 |
1.1191 | C45E (Ck45) |
Pure copper, low-alloyed copper | |
---|---|
2.0240 | CuZn15 |
2.0265 | CuZn30 |
Copper-tin alloy (bronze) short-chipping | |
---|---|
2.1090.01 | G-CuSn7ZnPb |
2.1086.01 | G-CuSn10Zn |
Plastics |
---|
PMMA |
POM |
PVC |