BAER SET HSS: Hand Taps | Cutting Dies | Tools : M 3 - 12
In stock
Express shipping available
BAER SET HSS: Hand Taps | Cutting Dies | Tools : M 3 - 12
The BAER HSSG thread cutting set contains everything you need to produce internal and external threads according to ISO standards. With the hand tap you can produce an exact internal thread in three steps. With the dies, you cut the perfect external thread and all that with only one associated holding tool each. Cutting straight into the core hole is the most important thing when drilling threads. The thread template and the screwdriver complete the set and you always have everything at hand from a high-quality metal case. And all this at an unbeatable price-performance ratio in well-known BAER quality. At BAER you buy this set ex works in tested BAER industrial quality. Especially when it comes to tools, it is always worth spending a few euros more. The set is suitable for the following materials: for easily machinable materials up to 900 N/mm², such as unalloyed structural steels, alloyed structural steels, free-cutting steels and cast steel.
Dimensions
| Diameter |
3 - 12 |
|---|---|
| Dimension |
M 3 - 12 |
Characteristics
| Product group |
threading tool sets |
|---|---|
| Product type |
Threading tool sets |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Tensile strength at room temperature |
up to 900 N/mm² | 27.1 HRC |
| Material |
HSSG bright |
Technical information – Screw taps
Through hole and blind hole up to 2 x D
Form C straight fluted
2-3 threads
see illustration
External cooling and lubrication
HSSG bright
up to 900 N/mm² | 27.1 HRC
ISO2/6H
Technical information - Cutting dies
1,5
ISO-6g
Set content
| BAER HSSG hand tap 3-piece set | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 8 x 1,25 | M 10 x 1,5 M 12 x 1,75 |
|---|---|
| BAER HSS round die ⌀ 25 x 9mm | M 3 x 0,5 | M 4 x 0,7 | M 5 x 0,8 M 6 x 1,0 | M 8 x 1,25 | M 10 x 1,5 M 12 x 1,75 |
| BAER adjustable die-cast tap wrench | No. 1.1/2: M 1-12 | 1/16-1/2 | G 1/8 |
| BAER PRO die holder | 25 x 9 |
| accessories | Screwdriver / thread gauge metric / instructions / tips for thread cutting |
Applications
- General-purpose use
- Materials with good machinability up to 900 N/mm²
- Unalloyed and low-alloy steels
- for through hole and blind hole
- for manual use
Further information
- M - Metric ISO thread DIN 13
- Information about tapping
- Designations, geometries and definitions on taps
- Thread tolerances of the internal thread
- Internal thread and core hole dimensions
- Tap Chamfer forms
- Cutting speeds, lubrication and cooling for taps
- Thread tolerances of external threads
- Bolt pre-machining diameter
Safety instructions
BAER HSSG hand tap- sets (3-piece)
for through-hole and blind hole | M 3 - M 12 threads
thread cutting with hand tap sets is the proven and traditional method of cutting an ideal internal thread by hand. It is easier for the user to tap straight into the hole, giving better control in the tapping process. The BAER hand taps- sets are 3-piece, manufactured according to DIN 352 and suitable for cutting ISO metric regular threads. A set consists of taper tap (No. 1), intermediate Tap (No. 2) and finishing tap (No. 3). All three share the work of tapping as follows:
- Taper tap (No. 1) (1 ring on shank): Form A, chamfer: 5-6 turns, removes 65% of the thread profile
- Intermediate Tap (No. 2) (2 rings on the shank): Form D, chamfer: 3-4 threads, removes 85% of the thread profile
- Finishing tap (No. 3) (no ring on the shank): Form C, chamfer: 2-3 threads, removes 100% of the thread profile
The BAER hand taps have a square shank, manufactured according to DIN10 and are especially suitable for use in tap wrenches or holding tools. This allows you to tap internal thread by hand without jamming. The reduced force on each individual screw tap is also an advantage, as it reduces the risk of breakage. You use the three-part sets with pilot, centre and finishing tap (No. 3) for coarse thread such as M, BSW, UNC. The BAER hand taps can be used for materials with good machinability up to 900 N/mm², such as unalloyed and low-alloy steels and cut a through-hole and blind hole up to 2 x D. The advantage of multi-part hand taps is that the respective parts of a set share the cutting power: This makes it easier to cut a straight and clean thread by hand.
The advantages at a glance:
- lower force effect on each individual screw tap → lower risk of breakage
- better control during the thread-cutting process
- for use in tap wrenches or holding tools
- Use in materials with good machinability up to 900 N/mm²
- Through-hole and blind hole up to 2 x D
Technical information:
- Form C: 2 - 3 threads chamfer
- Thread tolerance: ISO2/6H
BAER HSS round thread cutting die
for M 3 - M 12 external threads
BAER dies are used to produce metric external threads with a round external profile. You want to operate it by hand or by machine? Both work. These BAER dies made of high-performance high-speed steel HSS are suitable for normal applications for various materials with a strength of up to 800 N/mm². These include the following materials: general structural steels, free-cutting steels, case-hardening steels, unalloyed heat-treatable steels, pure copper, low-alloyed copper and copper-tin alloy (bronze) short-chipping, as well as plastics. The symmetrical design allows cutting in both axial directions. There are holes on the outside, here you can fix the die in the die holder and prevent it from twisting during use. All dies have an outer diameter of 25 x 9 mm, so all dies fit into only one die holder. The dies are cylindrical and have three or more cutting edges inside, depending on the size. The spiral point (spiral entry) ensures easy cutting and also good chip removal. The chip holes, which are holes or cavities between the cutting edges, provide the chip transport. They take up the chips, roll them and carry them away. The cutting tool has outer and inner teeth. The flattened outer teeth facilitate the gate, reduce wear and thus increase the tool life time. Each tooth takes a chip of the same width with it when cutting. The inner teeth have no cutting function: in the cut part of the thread they serve as straight guides. It is important that you lubricate the tool plumbed working and with cutting oil or cutting paste. You can find suitable cutting paste in our shop. Let the perfect quality of this tool and the strong price-performance ratio convince you. In addition to a fair price, our thread cutting dies for external threads can primarily convince with excellent quality. BAER cutting dies - for perfect external threads.
The advantages at a glance:
- little space required
- Adjustment without effort
- Use on simple and multi-spindle machines
- simple tool assembly
- Use from both sides
- Outstanding quality at a good price. That is BAER.
Technical information:
- DIN EN 22568 (formerly DIN 223 B)
- Thread tolerance: ISO-6g
- Chamfer: 1.5
BAER actuation tools
#Bear forces - thread cutting in the twinkling of an eye
Tool holders for manual actuation make the use of taps and dies possible in the first place. The adjustable holding tools are made of zinc die casting. They exert enough torque on the screw tap and dies to allow you to cut your threads by hand. BAER tool holders are stable and durable. See for yourself.
This adjustable tap wrench made of zinc die cast is suitable for the following use:
- Square : 2.1 - 8.0 mm
- for screw tap: M 1-12 | 1/16-1/2 | G 1/8
BAER die stock
25 x 9mm | M 7-9 | BSW 5/16 made of zinc die casting
You need a die stock to hold round thread cutting dies. BAER die stocks are manufactured according to DIN 225 and convince by their easy handling. The five fastening screws have a tip that centres in the pilot holes of the cutting irons and thus prevents twisting during use. You can tighten these screws with the enclosed screwdriver, so you always have everything to hand. The die holder is made of zinc die casting and is resilient, wear-resistant and a perfect fit. Benefit from an excellent price-performance ratio. At BAER, you buy tested tools at unbeatable prices with outstanding precision for lasting stability and power absorption!
This adjustable zinc die casting die holder is suitable for the following use:
- Diameter x height: 25 x 9 mm
- for dies in M and MF: M 7 - M 9
- for dies in: BSW 5/16
- Length: 224 mm
BAER adjustable tap wrench
GR. 1.1/2 | M 1-12 | 1/16-1/2 | G 1/8 made of zinc die casting
The adjustable tap wrench size 1.1/2 is an operating tool for screw tap from a zinc die casting body, with which internal thread can be cut by hand. The outstanding quality of the tap wrench lies not only in the material, but also in the clamping jaws, the handles and in the geometry, which make the tool stable and accurately fitting, manufactured according to DIN 1814. The long levers on the right and left help to cut plumb into the hole and easily apply the required torque. Another advantage is the easy handling and the short changing times. A lever can be twisted off on one side so that work can also be carried out in difficult-to-reach situations.
This adjustable zinc die casting tap wrench is suitable for the following applications:
- for hand and short machine taps in M and MF: M 1 - M12
- for hand and short machine taps in UNC, UNF, BSW and BSF: 1/16 - 1/2
- for hand and short machine taps in G (BSP): G 1/8
- Square drive: 2.1 - 8.0 mm
- Length: 176 mm
NOTE:
Please do not extend the handles of the tap wrench under any circumstances. The forces that can be achieved with the normal handles are sufficient for thread cutting.
BAER thread template
#Easy determination of thread sizes
With the BAER thread template you can easily determine the thread size. It completes the BAER thread cutting set and you always have everything at hand. The high-quality thread template is suitable for determining the external threads of screws and for determining metric threads. It has thread blades with which all common metric pitches: 0.5 - 1.75 mm can be measured/determined. The thread is determined by the so-called light gap method. You put an appropriate gauge on the thread and hold it against a light source. If almost no light penetrates between the thread and the gauge, the thread size can be read from the corresponding thread sheet. The sizes are stamped on the respective sheets and can be read very well and permanently.
Technical information:
- 52 blades, for metric and Whitworth threads
- Pitch 0.25-6.00 mm / 62-4 TPI W
- Weight: 83 g
- Dimensions: 16 x 8 x 5.5 cm
Quality
for long service life
The high-alloy tool steel HSS can work with up to four times higher cutting speeds than ordinary tool steel.
This set is characterised by:
- Temperature resistance / heat hardness
- Wear resistance
- Cutting edge stability
- high smooth running
- good chip evacuation
This means that BAER hand taps and dies made of high-speed steel HSS can cope with many material requirements. Accurate work and long-term cost savings are added to this.
Accessories
