BaerCoil Wire Thread Inserts BSF 1.1/4“ x 9 - 1,5 D (47,63 mm) - free running - 10 pcs.
BaerCoil Wire Thread Inserts BSF 1.1/4“ x 9 - 1,5 D (47,63 mm) - free running - 10 pcs.
BaerCoil® thread inserts are made of high-quality materials wire thread inserts. BaerCoil® thread inserts provide a durable and powerful threaded connection and scrap recovery in the thread repair. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant, holding your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are commonly used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread, even in lightweight constructions. Today, they are already an important component in aviation and vehicle construction. They save weight and allow the use of smaller and shorter screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
Diameter |
1.1/4" |
---|---|
Pitch |
9 |
Dimension |
BSF 1.1/4" x 9 |
Length |
1,5 D |
T (Length when installed) |
47,63 mm |
Thread length calculation |
1,5 D heißt 1,5 mal Durchmesser: 1,5 mal 31,75 mm = 47,63 mm Der Nenndurchmesser bei BSF 1.1/4" beträgt ca. 31,75 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSF: British Whitworth fine thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
1.1/4" |
---|---|
Length |
1,5 D |
T (Length when installed) |
47,63 mm |
F (Min. - Max. outside diameter of thread insert) |
1,382 '' - 1,500 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
2,264 '' |
D (minimum depth of the core hole, without tip) |
2,375 '' |