BaerCoil Wire Thread Inserts BSF 5/16 x 22 - 1.0 D (7.94 mm) - free running - 100 pcs.
BaerCoil Wire Thread Inserts BSF 5/16 x 22 - 1.0 D (7.94 mm) - free running - 100 pcs.
BaerCoil® wire thread inserts provide a long-lasting, powerful connection and scrap recovery in the thread repair. They also create load-bearing connections in materials with low shear strength. Precise and wear-resistant, the inserts hold your screw firmly in place without deforming the thread insert. Ideal for repairing damaged or worn threads. wire thread inserts are often used in areas such as automotive, electrical engineering, medical technology or lightweight construction as well as in aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly more stable than the original thread.
BaerCoil® thread inserts ensure that both static and dynamic work loads are evenly distributed between the individual thread turns. Also, the flexibility of the ® thread inserts compensates for any pitch and angular errors, so that optimum force transmission from the bolt to the nut thread is achieved.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
5/16 |
|---|---|
| Pitch |
22 |
| Dimension |
BSF 5/16 x 22 |
| Length |
1,0 D |
| T (Length when installed) |
7,94 mm |
| Thread length calculation |
1.0 D means 1 times the diameter: 1 times 7.94 mm=7.94 mm The nominal diameter for BSF 5/16 is approx. 7.94 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
BSF: British Whitworth fine thread according to BS 84 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
5/16 |
|---|---|
| Length |
1,0 D |
| T (Length when installed) |
7,94 mm |
| F (Min. - Max. outside diameter of thread insert) |
0,367 '' - 0,405 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
0,471 '' |
| D (minimum depth of the core hole, without tip) |
0,516 '' |
