BaerCoil Wire Thread Inserts BSW 1.1/8“ x 7 - 1.0 D (28.58 mm) - free running - 10 pcs.
BaerCoil Wire Thread Inserts BSW 1.1/8“ x 7 - 1.0 D (28.58 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the best solution for all your repair needs! With them you can create long-lasting and powerful connections. These inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. With the use of BaerCoil® thread inserts, the thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened to the required length with a side cutter or similar.
Dimensions
Diameter |
1.1/8" |
---|---|
Pitch |
7 |
Dimension |
BSW 1.1/8" x 7 |
Length |
1,0 D |
T (Length when installed) |
28,58 mm |
Thread length calculation |
1.0 D means 1 times the diameter: 1 times 28.58 mm=28.58 mm The nominal diameter at BSW 1.1/8" is approx. 28.58 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSW: British Whitworth standard thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
1.1/8" |
---|---|
Length |
1,0 D |
T (Length when installed) |
28,58 mm |
F (Min. - Max. outside diameter of thread insert) |
1,293 '' - 1,354 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
1,625 '' |
D (minimum depth of the core hole, without tip) |
1,768 '' |