BaerCoil Wire Thread Inserts BSW 3/8 x 16 - 2.5 D (23.81 mm) - free running - 100 pcs.
€133.45*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts BSW 3/8 x 16 - 2.5 D (23.81 mm) - free running - 100 pcs.
BaerCoil® wire thread inserts not only ensure a long-lasting and powerful threaded connection in the thread repair, but also enable scrap recovery. The inserts also create load-bearing connections in materials with low shear strength. Thanks to their precision and wear resistance, the BaerCoil® thread inserts hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are often used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads and that at the same time nominal diameter. With BaerCoil® thread inserts, the thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are indispensable for optimal power transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced manner to the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
Diameter |
3/8 |
---|---|
Pitch |
16 |
Dimension |
BSW 3/8 x 16 |
Length |
2,5 D |
T (Length when installed) |
23,81 mm |
Thread length calculation |
2.5 D means 2.5 times the diameter: 2.5 times 9.53 mm=23.81 mm The nominal diameter at BSW 3/8 is approx. 9.53 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSW: British Whitworth standard thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
3/8 |
---|---|
Length |
2,5 D |
T (Length when installed) |
23,81 mm |
F (Min. - Max. outside diameter of thread insert) |
0,449 '' - 0,472 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
1,156 '' |
D (minimum depth of the core hole, without tip) |
1,219 '' |