BaerCoil Wire Thread Inserts M 10 x 1.5 - 1.0 D (10 mm) - free running - AISI 316 - 100 pcs.
BaerCoil Wire Thread Inserts M 10 x 1.5 - 1.0 D (10 mm) - free running - AISI 316 - 100 pcs.
BaerCoil® wire thread inserts provide a long-lasting, powerful connection and scrap recovery in the thread repair. They also create load-bearing connections in materials with low shear strength. Precise and wear-resistant, the inserts hold your screw firmly in place without deforming the thread insert. Ideal for repairing damaged or worn threads. wire thread inserts are often used in areas such as automotive, electrical engineering, medical technology or lightweight construction as well as in aerospace.
For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. Often this thread is also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened with a side cutter or similar, according to the required length.
Dimensions
| Diameter | 10 |
|---|---|
| Pitch | 1,5 |
| Dimension | M 10 x 1,5 |
| Length | 1,0 D |
| T (Length when installed) | 10 mm |
| Thread length calculation | 1.0 D means 1 times the diameter: 1 times 10 mm=10 mm The nominal diameter for M 10 is 10 mm |
Characteristics
| Product group | Wire thread inserts |
|---|---|
| Product type | BaerCoil wire thread inserts |
| Thread standard | M: Metric ISO standard thread according to DIN 13 |
| Tolerance | ISO2/6H |
| Direction | Right |
| Type | free running |
| Tensile strength at room temperature | >1400 N/mm² |
| Material | Stainless Steel V4A (AISI 316, X5CrNiMo17-12-2, Material No.: 1.4401) |
| Temperature resistance | 315°C long-term 425°C short-term |
Applications
Applications in seawater and chlorinated water
Attributes
- improved corrosion resistance
- reduced thread friction
- for high-alloy CrNi steel screws
Technical drawing
| Diameter | 10 |
|---|---|
| Length | 1,0 D |
| T (Length when installed) | 10 mm |
| F (Min. - Max. outside diameter of thread insert) | 11,74 mm - 12,50 mm |
| P (depth) | The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) | 15,25 mm |
| D (minimum depth of the core hole, without tip) | 16,75 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
