BaerCoil Wire Thread Inserts M 12 x 1.25 - 2.5 D (30 mm) - free running - 100 pcs.
BaerCoil Wire Thread Inserts M 12 x 1.25 - 2.5 D (30 mm) - free running - 100 pcs.
BaerCoil® thread inserts are the best solution for all your repair needs! With them you can create long-lasting and powerful connections. These inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. STI thread (screw thread insert) is cut and the BaerCoil® insert is screwed in. The thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread, even in lightweight constructions. Today, they are already an important component in aviation and vehicle construction. They save weight and allow the use of smaller and shorter screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
12 |
|---|---|
| Pitch |
1,25 |
| Dimension |
MF 12 x 1,25 |
| Length |
2,5 D |
| T (Length when installed) |
30 mm |
| Thread length calculation |
2.5 D means 2.5 times the diameter: 2.5 times 12 mm=30 mm The nominal diameter for MF 12 is 12 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
12 |
|---|---|
| Length |
2,5 D |
| T (Length when installed) |
30 mm |
| F (Min. - Max. outside diameter of thread insert) |
13,47 mm - 15,00 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
34,38 mm |
| D (minimum depth of the core hole, without tip) |
35,63 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
