BaerCoil Wire Thread Inserts M 24 x 2.0 - 3.0 D (72 mm) - free running - 25 pcs.
BaerCoil Wire Thread Inserts M 24 x 2.0 - 3.0 D (72 mm) - free running - 25 pcs.
BaerCoil® thread inserts are made of high-quality materials wire thread inserts. BaerCoil® thread inserts provide a durable and powerful threaded connection and scrap recovery in the thread repair. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant, holding your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are commonly used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads - with the same nominal diameter! For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. Often this thread is also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened to the required length with a side cutter or similar.
Dimensions
Diameter |
24 |
---|---|
Pitch |
2,0 |
Dimension |
MF 24 x 2,0 |
Length |
3,0 D |
T (Length when installed) |
72 mm |
Thread length calculation |
3.0 D means 3 times the diameter: 3 times 24 mm=72 mm The nominal diameter for MF 24 is 24 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
Tolerance |
ISO2/6H |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
24 |
---|---|
Length |
3,0 D |
T (Length when installed) |
72 mm |
F (Min. - Max. outside diameter of thread insert) |
26,32 mm - 29,10 mm |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
79,00 mm |
D (minimum depth of the core hole, without tip) |
81,00 mm |