BaerCoil Wire Thread Inserts M 27 x 3.0 - 2.0 D (54 mm) - free running - 5 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 27 x 3.0 - 2.0 D (54 mm) - free running - 5 pcs.
BaerCoil® thread inserts are the best solution for all your repair needs! With them you can create long-lasting and powerful connections. These inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. STI thread (screw thread insert) is cut and the BaerCoil® insert is screwed in. The thread produced is significantly stronger than the original thread.
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened with a side cutter or similar, according to the required length.
Dimensions
| Diameter |
27 |
|---|---|
| Pitch |
3,0 |
| Dimension |
M 27 x 3,0 |
| Length |
2,0 D |
| T (Length when installed) |
54 mm |
| Thread length calculation |
2.0 D means 2 times the diameter: 2 times 27 mm=54 mm The nominal diameter for M 27 is 27 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
27 |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
54 mm |
| F (Min. - Max. outside diameter of thread insert) |
30,43 mm - 32,40 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
64,50 mm |
| D (minimum depth of the core hole, without tip) |
67,50 mm |
Content
Video instructions
Further information
Product data sheet
Safety instructions
Login
