BaerCoil Wire Thread Inserts M 39 x 2.0 - 1.5 D (58.5 mm) - free running - 5 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 39 x 2.0 - 1.5 D (58.5 mm) - free running - 5 pcs.
BaerCoil® wire thread inserts provide a long-lasting and powerful thread connection and scrap recovery in the thread repair. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant and hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are commonly used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads. STI thread (screw thread insert) is cut and the BaerCoil® insert is screwed in. The thread produced is significantly stronger than the original thread.
Our thread inserts ensure that both static and dynamic work loads are distributed in a balanced way to the individual thread turns. The flexibility of the thread inserts also compensates for any pitch and angle errors, so that optimum force transmission from the bolt to the nut thread is achieved. Particularly in lightweight constructions, BaerCoil® thread inserts helps to reduce the carrier material and to use smaller or shorter screw connections. Today, they are already an important component in aviation and vehicle construction. They significantly save material and contribute to the conservation of resources.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
39 |
|---|---|
| Pitch |
2,0 |
| Dimension |
MF 39 x 2,0 |
| Length |
1,5 D |
| T (Length when installed) |
58,5 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 39 mm=58.5 mm The nominal diameter for MF 39 is 39 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
39 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
58,5 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
