BaerCoil Wire Thread Inserts M 6 x 1.0 - 1.5 D (9 mm) - free running - 10 pcs.
BaerCoil Wire Thread Inserts M 6 x 1.0 - 1.5 D (9 mm) - free running - 10 pcs.
BaerCoil® thread inserts are the perfect solution for your thread repair needs! These inserts provide a long lasting and powerful thread connection and scrap recovery.
The BaerCoil® thread insert is the perfect solution for damaged threads. To thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) is cut for the wire- thread insert.
BaerCoil® thread inserts ensure that both static and dynamic work loads are distributed evenly over the individual thread turns. Also, the flexibility of the ® thread inserts compensates for any pitch and angular errors so that optimum force transmission from the bolt to the nut thread is achieved.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
Diameter |
6 |
---|---|
Pitch |
1,0 |
Dimension |
M 6 x 1,0 |
Length |
1,5 D |
T (Length when installed) |
9 mm |
Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 6 mm=9 mm The nominal diameter for M 6 is 6 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
M: Metric ISO standard thread according to DIN 13 |
Tolerance |
ISO2/6H |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
6 |
---|---|
Length |
1,5 D |
T (Length when installed) |
9 mm |
F (Min. - Max. outside diameter of thread insert) |
7,17 mm - 7,95 mm |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
12,50 mm |
D (minimum depth of the core hole, without tip) |
13,50 mm |