BaerCoil Wire Thread Inserts UNC 5/8 x 11 - 2.0 D (31.75 mm) - free running - 50 pcs.
BaerCoil Wire Thread Inserts UNC 5/8 x 11 - 2.0 D (31.75 mm) - free running - 50 pcs.
BaerCoil® wire thread inserts not only ensure a long-lasting and powerful threaded connection in the thread repair, but also enable scrap recovery. The inserts also create load-bearing connections in materials with low shear strength. Thanks to their precision and wear resistance, the BaerCoil® thread inserts hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are often used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) is cut for the wire- thread insert.
Our thread inserts ensures that both static and dynamic work loads are distributed in a balanced manner over the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angle errors, so that an optimal power transmission from the bolt to the nut thread is achieved. Particularly in lightweight constructions, BaerCoil® thread inserts helps to reduce the carrier material and to use smaller or shorter screw connections. Today, they are already an important component in aviation and vehicle construction. They significantly save material and contribute to the conservation of resources.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
5/8 |
|---|---|
| Pitch |
11 |
| Dimension |
UNC 5/8 x 11 |
| Length |
2,0 D |
| T (Length when installed) |
31,75 mm |
| Thread length calculation |
2.0 D means 2 times the diameter: 2 times 15.88 mm=31.75 mm The nominal diameter at UNC 5/8 is approx. 15.88 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
UNC: American Unified National Coarse thread according to ANSI B1.1 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
5/8 |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
31,75 mm |
| F (Min. - Max. outside diameter of thread insert) |
0,730 '' - 0,767 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
1,568 '' |
| D (minimum depth of the core hole, without tip) |
1,659 '' |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
