BaerCoil Wire Thread Inserts UNC No. 12 x 24 - 2.0 D (10.97 mm) - free running - 100 pcs.
BaerCoil Wire Thread Inserts UNC No. 12 x 24 - 2.0 D (10.97 mm) - free running - 100 pcs.
BaerCoil® thread inserts provide a long-lasting and powerful thread connection and scrap recovery. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant, holding your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are commonly used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimal force transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
No. 12 |
|---|---|
| Pitch |
24 |
| Dimension |
UNC No. 12 x 24 |
| Length |
2,0 D |
| T (Length when installed) |
10,97 mm |
| Thread length calculation |
2.0 D means 2 times the diameter: 2 times 5.49 mm=10.97 mm The nominal diameter at UNC No. 12 is approx. 5.49 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
UNC: American Unified National Coarse thread according to ANSI B1.1 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
No. 12 |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
10,97 mm |
| F (Min. - Max. outside diameter of thread insert) |
0,265 '' - 0,283 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
0,578 '' |
| D (minimum depth of the core hole, without tip) |
0,620 '' |
