BaerCoil Wire Thread Inserts UNF No. 10 x 32 - 1.5 D (7.24 mm) 10 pcs.
BaerCoil Wire Thread Inserts UNF No. 10 x 32 - 1.5 D (7.24 mm) 10 pcs.
BaerCoil® wire thread inserts provide a long-lasting, powerful connection and scrap recovery in the thread repair. They also create load-bearing connections in materials with low shear strength. Precise and wear-resistant, the inserts hold your screw firmly in place without deforming the thread insert. Ideal for repairing damaged or worn threads. wire thread inserts are often used in areas such as automotive, electrical engineering, medical technology or lightweight construction as well as in aerospace.
For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. Often this thread is also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts are essential for optimal power transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced manner to the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
No. 10 |
|---|---|
| Pitch |
32 |
| Dimension |
UNF No. 10 x 32 |
| Length |
1,5 D |
| T (Length when installed) |
7,24 mm |
| Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 4.83 mm=7.24 mm The nominal diameter for UNF No. 10 is approx. 4.83 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
UNF: American Fine Unified National thread according to ANSI B1.1 |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
No. 10 |
|---|---|
| Length |
1,5 D |
| T (Length when installed) |
7,24 mm |
| F (Min. - Max. outside diameter of thread insert) |
0,227 '' - 0,256 '' |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
0,394 '' |
| D (minimum depth of the core hole, without tip) |
0,426 '' |
Video instructions
Further information
Product data sheet
Zubehör
