Express shipping available

BAER HSSG Short Machine Tap Form D - G (BSP) 1/8 x 28

€6.31*

Prices incl. VAT plus shipping costs

In stock

Express shipping is also possible for this product

Item no. 130101001
EAN 4058462009105
Product information

BAER HSSG Short Machine Tap Form D - G (BSP) 1/8 x 28

Short machine taps allow you to cut a finished thread with just one tool in one step, even by hand. Exact internal thread can be cut by hand or semi-professionally by machine to save time.
Compared to the machine tap, the short machine tap has a short shank. This allows you to cut internal thread by hand without jamming and can be operated with tap wrenches, tool ratchets or other holding tools with square drive.
The thread can be cut in a pre-drilled core hole and does not require any preparatory work by a taper tap (No. 1) or intermediate tap (No. 2).
This internal tap clearly offers the price advantage over the hand tap set, as you no longer need two or three screw taps for thread cutting, but only one screw tap. The high time saving also significantly increases the efficiency of thread cutting.
Due to the short chamfer and the straight flutes, chip is mainly absorbed by the flutes and is not removed during cutting. We recommend removing the chip from the flutes with a brush, compressed air or similar after each thread to prevent chip jamming. This chamfer form makes the screw tap reliable and universally applicable for through holes and blind holes.

Dimensions

Diameter 1/8
Nominal diameter in inches 0,383
Nominal diameter in mm 9,73
Pitch 28
Pitch in mm 0,907
Dimension G (BSP) 1/8 x 28

Characteristics

Product group Screw taps
Product type Short machine taps
Thread standard G (BSP): British Standard Pipe Thread according to DIN ISO 228 - Cylindrical pipe thread
Tolerance medium
Direction Right
Standard DIN 5157
Tensile strength at room temperature up to 900 N/mm² | 27.1 HRC
Material HSSG bright

Core hole diameter: 8.8 mm
Core hole diameter
8.8 mm
Bild Lochtyp: https://media.baer.tools/media/vector/19/52/9d/durchgangsloch_und_sackloch.svg
Hole type
Through hole and blind hole up to 4 x D
Bild Form: https://media.baer.tools/media/vector/3f/1d/45/gewindebohrer_gerade_nuten.svg
Form / Geometry
Form D straight fluted
Bild Anschnitt: https://media.baer.tools/media/vector/59/5d/26/gewindebohrer_anschnitt.svg
Chamfer
3.5-5 threads
Bild Spanabfuhr
Chip removal
Rarely occurs. Chips remain in flutes.
Bild Kühlung: https://media.baer.tools/media/vector/41/a7/9a/gewindebohrer_aussenkuehlung.svg
Cooling
External cooling and lubrication
Bild Material: https://media.baer.tools/media/vector/c8/8d/2f/gewindebohrer_blank.svg
Material
HSSG bright
Bild Zugfestigkeit: https://media.baer.tools/media/vector/c0/4a/39/zugfestigkeit.svg
Tensile strength at room temperature
up to 900 N/mm² | 27.1 HRC
Tolerance: medium
Tolerance
medium

Applications

  • General-purpose use
  • Materials with good machinability up to 900 N/mm²
  • Unalloyed and low-alloy steels
  • for through hole and blind hole
  • for hand and machine use

Examples of applications

  • Inch thread or Whitworth thread in the sanitary sector
  • G-pipe pipe thread
  • Fittings, connectors, nipples, threaded fittings for water pipes, sanitary threads, water threads
  • Double nipples and double pipe nipples
  • Angle connection
  • Pipe threaded connections

Technical drawing

D1 G (BSP) 1/8 x 28
D2 7 mm
L1 63 mm
L2 20 mm
Diameter 1/8
Square 5,5 mm

Application – Sample materials for taps

Unalloyed construction steels
1.0035S185 (St33)
1.0036S235JRH
1.0038RSt37-2
1.0039S235JRG1+CR
1.0044St44-2
1.0060E335 (St60-2)
1.0116St37-3
1.0570St 52-3
Alloyed construction steels
1.541515Mo3
1.542316Mo5
1.562214Ni6
1.733513CrMo44
1.733716CrMo44
1.771514MoV63
Free-cutting steels
1.07119S20
1.07159SMn28
1.071811SMnPb30
1.072110S20
1.072315S20
1.072635S20
1.07379SMnPb36
1.075860SPb20
Case-hardening steels
1.0401(C15)
1.701617CR3
1.713116MnCr5
1.591915CrNi6
Quenched and tempered steels unalloyed
1.0402C 22
1.1151C22E (Ck22)
1.0503C 45
1.1191C45E (Ck45)
Cast steel
1.0420GS-38
1.5419GS-22 Mo 4
1.6750GS-20 NiCrMo3 7
1.7357 GS-17 CrMo 5 5
Malleable cast iron
0.8145EN-GJMB 450-6
0.8170EN-GJMB 700-2
0.8045EN-GJMW-450-7
0.8055EN-GJMW-550-4
Pure copper low-alloyed
2.0240CuZn15
2.0265CuZn30
Brass short-chipping
2.0401CuZn39Pb3
Brass long-chipping
2.0321CuZn37
2.0335CuZn36
2.0360CuZn40
Aluminum cast Si > 5-12 %
3.2161G-AlSi8Cu3
3.2163G-AlSi9Cu3
3.2381G-AlSi10Mg
3.2583G-AlSi12(Cu)
Lamellar graphite cast iron
0.6010EN-GJL 100 (GG-10)
0.6020EN-GJL 200 (GG -20)
0.6025EN-GJL 250 (GG-25)
0.6030EN-GJL 300 (GG -30)
Copper-tin alloy (bronze) short-chipping
2.1090.01G-CuSn7ZnPb
2.1086.01G-CuSn10Zn
2.1097G-CuSn5ZnPb
Pure copper, low-alloyed copper
2.0240CuZn15
2.0265CuZn30

Zubehör

HSSG 90° Countersink 16.5 mm (for M 8)
HSSG 90° Countersink 16.5 mm (for M 8)
Item no.: 745165
€12.48*
Details
HSSE Extreme Drill Bit 8.80 mm
HSSE Extreme Drill Bit 8.80 mm
Item no.: 10088050
€11.42*
Details
BAER Short Tap Holder with Ratchet M 3-10 | 1/8-3/8
BAER Short Tap Holder with Ratchet M 3-10 | 1/8-3/8
Item no.: 491625001
€8.75*
Details
BAER Long Tap Holder with Ratchet M 3-10 | 1/8-3/8
BAER Long Tap Holder with Ratchet M 3-10 | 1/8-3/8
Item no.: 491625010
€16.26*
Details
BAER Extension Sleeve for square 5.5mm | M 9-10
BAER Extension Sleeve for square 5.5mm | M 9-10
Item no.: 491925055
€4.20*
Details
BAER Round Cutting Die G (BSP) 1/8 x 28 - HSS
BAER Round Cutting Die G (BSP) 1/8 x 28 - HSS
Item no.: 131401001
€19.31*
Details
BAER High Performance Cutting Paste 100 ml
BAER High Performance Cutting Paste 100 ml
Item no.: SP100
€8.98*
Details
BAER Set HSS small: Hand Tap | cutting dies | tools : G 1/8 - 1"
BAER Set HSS small: Hand Tap | cutting dies | tools : G 1/8 - 1"
Item no.: 264802014
€656.77*
Details
BAER Set HSSG: Machine Taps | Hexagon Die Nuts: G(BSP) 1/8'' - 3/4''
BAER Set HSSG: Machine Taps | Hexagon Die Nuts: G(BSP) 1/8'' - 3/4''
Item no.: BSR1
€184.83*
Details