BAER ULTRA SET HSSE STAINLESS STEEL: Hand Taps | Cutting Dies | Tools | Cutting Paste: M 3 - 12

For the sake of the environment - made from renewable raw materials
#Tool heroes with responsibility

We are committed to our fellow human beings and to future generations. In line with the neo-ecology megatrend, we focus our actions on the intelligent and sustainable use of resources. For us, sustainability is a value system that shows the highest respect for people and the environment. That is why we have chosen a sustainable and stable solution: the tool box made of glucose, natural waxes, minerals and natural fibres. The carbon needed for its production is extracted from the CO₂ in the atmosphere. Subsequent thermal recycling is thus CO₂-neutral, the CO₂ cycle is closed. The tool box are fully recyclable, so that valuable raw materials are retained in the material cycle.

HSSE-CO twist drill bit for core hole drilling
#You can't do without it

Almost every do-it-yourselfer has worked with them: the classic drilling tools for cordless screwdrivers, drills, impact drills or hammer drills. Decisive for the application of the drill is not only the material, but also the cutting edge geometry, the rake angle and the spiral angle, the so-called twist. These drills are particularly stable and made of high-alloy HSSE/Cobalt steel with pronounced heat resistance and extremely high runout accuracy. For drilling iron, steels, cast materials, bronzes, heat-treatable and case-hardening steels up to 1200 N/mm², as well as high-strength CrNi-based alloys and rust-, acid- and heat-resistant steels, such as V2A,V4A, INOX. The core hole drillings are essential to cut a internal thread afterwards.

HSSE-CO core drill bit DIN 338 for M 3 - M 12:

Ø 2.5 mm (M 3) | Ø 3.3 mm (M 4) | Ø 4.2 mm (M 5)| Ø 5.0 mm (M 6) | Ø 6.8 mm (M 8) | Ø 8.5 mm (M 10) | Ø 10.2 mm (M 12)

ULTRA-VA hand taps - nothing goes wrong even in stainless steel
#unbreakable

The taper tap (No. 1) with guide nose of the 3-part hand tap sets are a real speciality. They ensure that perpendicular threads are always cut, even in the trickiest places. Crooked thread cutting is one of the most common causes of tool breakage. With these sets, that no longer happens. The geometries and surface of the screw tap are designed for cutting stainless steel. The advantage of multi-part hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) takes 65 per cent of the thread profile, the intermediate Tap (No. 2) 85 per cent and the finishing tap (No. 3) 100 per cent. This makes it easier to cut a straight and clean thread by hand.

Ultra HSSE-VAP hand tap- sets (3-piece) DIN 352 for stainless steel - taper tap (No. 1) with guide tang

M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 8 x 1.25 |M 10 x 1.5 | M 12 x 1.75

HSSE-NT dies - for perfect external threads
#runs round

These high-performance dies are made of cobalt alloyed high speed steel HSSE. The dies provide improved chip removal with their spiral point (spiral entry) and are lapped to smooth the cutting edges and reduce thread friction. The surface hardness is additionally increased by nitriding (1100-1200 HV). The geometry of this cutting tool is specially designed for machining stainless steels. The holes between the cutting edges take up the chips, roll them and carry them away. The cutting iron has outer and inner teeth. The flattened outer teeth make it easier to cut, reduce wear and thus increase the tool life time. Each tooth takes a chip of the same width with it when cutting. The inner teeth have no cutting function: in the cut part of the thread they serve as straight guides. The symmetrical design allows cutting in both axial directions.

HSSE-NT thread cutting dies DIN 223 for stainless steel

M 3 x 0.5 | M 4 x 0.7 | M 5 x 0.8 | M 6 x 1.0 | M 8 x 1.25 |M 10 x 1.5 | M 12 x 1.75

PRO adjustable tap wrench - custom-fit holding tools for screw tap
#fits like a glove

The PRO adjustable tap wrench is an actuating tool for screw tap made from a high-end zinc die casting body, with which internal thread can be cut by hand. The outstanding quality of the tap wrench is not only in the material, but also in the premium clamping jaws, the handles and the geometry, which make the tool extremely stable and very precise to use. The long levers on the right and left help to cut plumb into the hole and easily apply the required torque. Another advantage is the easy handling and the short changing times. A lever can be turned off on one side to be able to work in hard-to-reach situations.

PRO adjustable tap wrenches DIN 18140

No. 1: M 1 - M 10
No. 2: M 4 - M 12

PRO die stock with die guides - it doesn't get any better than this
#tool perfectionists

Our PRO die stocks are made of high-end zinc die casting. They have a very stable design and are therefore very resilient, wear-resistant and accurate. With screws you fix the die in a suitable holder and thus prevent it from twisting during use. In addition, the design allows the use of the included die guides. The PRO die guides are made of free-cutting steel with an oxidised surface. This makes them a better fit, more stable and more durable than ever before. They provide optimum guidance for cutting a plumb external thread. When using them, it is important that the holes in the guide overlap with the holes in the die to ensure chip removal.

PRO die stocks DIN 22568

20 x 5 mm (M 3 - M 4) | 20 x 7 mm (M 5 - M 6) | 25 x 9 mm (M 8) | 30 x 11 mm (M 10) | 38 x 14 mm (M 12)

Tool ratchets - thread cutting with ratchet
#as in no time at all

We offer you the operating tool with ratchet in proven BAER quality. To clamp the screw tap, the chuck can be easily turned open and closed. With the lever you can set the chuck to clockwise or anti-clockwise rotation. The ratchet function of the tool ratchet is particularly practical when you need to cut the thread in tight situations. Tapping is a breeze with it.

Tool ratchets with ratchet function for screw tap

No. 1: M 1 - M 10
No. 2: M 4 - M 12

Cutting paste - for lubricating and cooling
#stay cool

Cutting pastes contribute to the cooling of drills, taps and dies. By adding a lubricant during cutting operations, you reduce the temperature, which in turn significantly extends tool life. It also reduces friction between the tool and the workpiece and thus wear and corrosion. This makes efficient and economical work possible. The BAER high-performance cutting paste with high-quality pressure additives achieves an excellent lubricating effect and is indispensable at thread cutting. The paste adheres to the cutting edges and only becomes liquid when used. As it does not contain any additives such as petroleum, chlorine or sulphur, it is extremely environmentally friendly.

High-performance cutting paste 100 ml

Accessories - like a car without a radio
#toollove

Who would want to do without valuable accessories? A tool lover certainly not. With the perfect accessories, this threading set becomes what it is: a masterpiece and all-rounder for tool lovers. If you try it once, you will never want to work with anything else again. With the thread template, you can determine the pitch of an existing external thread (e.g. a screw) and then cut a suitable internal thread with the correct screw tap. The included screwdriver can be used to tighten and loosen the screws of the die guides. Everything you need in one place, immediately to hand, clearly sorted in an environmentally friendly box.

Quality for generations
#Heirloom #Masterpiece

Are you looking for a high quality and sustainable tap set with dies and accessories? Then our BAER ULTRA tap set is exactly what you need! Our taps are made of the best material and guarantee you a precise and long-lasting cutting experience. Our threading tools are ground with the greatest care to guarantee you a perfect grinding pattern and a long service life. Convince yourself of our masterpiece. Look forward to only working with tools of the best quality and complete your workshop assortment with a set that, in the best case, can be inherited. Since all tools comply with the common DIN standards, replacement purchases or extensions to the assortment are possible at any time. We always recommend our customers to buy standard DIN tools, as this way the holding tools will also fit other taps and dies and repeat purchases will always be possible.