BAER HSSE Short Machine Tap - 15° RSP - TR 20 x 2 - LEFT
BAER HSSE Short Machine Tap - 15° RSP - TR 20 x 2 - LEFT
This left-hand cutting single-flute tap enables you to cut a finished left-hand thread in one step with just one tool, even by hand. Exact internal thread can thus be cut time-savingly by hand or semi-professionally by machine.
Compared to the machine tap, the short machine tap has a short shank. This allows you to cut internal thread by hand without jamming and can be operated with tap wrenches, tool ratchets or other holding tools with square drive.
The thread can be cut in a pre-drilled core hole and does not require any preparatory work by a taper tap (No. 1) or intermediate tap (No. 2).
This internal tap clearly offers the price advantage over the hand tap set, as you no longer need two or three screw taps for thread cutting, but only one screw tap. The high time saving in this process also significantly increases efficiency at thread cutting.
With the direction of the spiral flute opposite to the cutting direction, these taps are particularly suitable for through holes up to 2.0 times the diameter. Due to the high cutting forces that hit the trapezoidal profile, the screw tap can break on longer threads. For longer threads, we recommend using a multi-part screw tap set.
Dimensions
| Diameter |
20 |
|---|---|
| Pitch |
2,0 |
| Dimension |
TR 20 x 2,0 |
Characteristics
| Product group |
Screw taps |
|---|---|
| Product type |
Short machine taps |
| Thread standard |
TR: Trapezoidal thread according to DIN 103 |
| Tolerance |
7H |
| Direction |
Left |
| Standard |
Factory standard |
| Tensile strength at room temperature |
up to 900 N/mm² | 27.1 HRC |
| Material |
HSSE bright |
18.2 mm
Through hole up to 2 x D
Form C 15° RSP
2-3 threads
Chips are removed upwards against the cutting direction
External cooling and lubrication
HSSE bright
up to 900 N/mm² | 27.1 HRC
7H
Applications
- General-purpose use
- Materials with good machinability up to 900 N/mm²
- Unalloyed and low-alloy steels
Technical drawing
| D1 |
TR 20 x 2 |
|---|---|
| D2 |
16 mm |
| L1 |
140 mm |
| L2 |
27 mm |
| Diameter |
20 |
| Square |
12 mm |
Application – Sample materials
| Unalloyed construction steels | |
|---|---|
| 1.0035 | S185 (St33) |
| 1.0044 | St44-2 |
| 1.0116 | St37-3 |
| 1.0570 | St 52-3 |
| Alloyed construction steels | |
|---|---|
| 1.5415 | 15Mo3 |
| 1.5423 | 16Mo5 |
| 1.5622 | 14Ni6 |
| 1.7335 | 13CrMo44 |
| Free-cutting steels | |
|---|---|
| 1.0711 | 9S20 |
| 1.0715 | 9SMn28 |
| 1.0723 | 15S20 |
| 1.0737 | 9SMnPb36 |
| Lamellar graphite cast iron | |
|---|---|
| 0.6010 | EN-GJL 100 (GG-10) |
| 0.6020 | EN-GJL 200 (GG -20) |
| 0.6025 | EN-GJL 250 (GG-25) |
| 0.6030 | EN-GJL 300 (GG -30) |
