BaerCoil Wire Thread Inserts BSW 9/16 x 12 - 1.5 D (21.43 mm) - free running - 50 pcs.
€126.24*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts BSW 9/16 x 12 - 1.5 D (21.43 mm) - free running - 50 pcs.
BaerCoil® thread inserts are the perfect solution for your thread repair needs! These inserts provide a durable and powerful thread connection and scrap recovery. With BaerCoil® thread inserts you also create load-bearing connections in materials with low shear strength. Precise and wear-resistant, the inserts hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts are often used in automotive, electrical, medical, lightweight construction, and aerospace applications.
The BaerCoil® thread insert is the perfect solution for damaged threads and that at the same time nominal diameter. With BaerCoil® thread inserts, the manufactured thread is significantly stronger than the original thread.
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum force transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
Diameter |
9/16 |
---|---|
Pitch |
12 |
Dimension |
BSW 9/16 x 12 |
Length |
1,5 D |
T (Length when installed) |
21,43 mm |
Thread length calculation |
1.5 D means 1.5 times the diameter: 1.5 times 14.29 mm=21.43 mm The nominal diameter at BSW 9/16 is approx. 14.29 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
BSW: British Whitworth standard thread according to BS 84 |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
9/16 |
---|---|
Length |
1,5 D |
T (Length when installed) |
21,43 mm |
F (Min. - Max. outside diameter of thread insert) |
0,661 '' - 0,694 '' |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
1,135 '' |
D (minimum depth of the core hole, without tip) |
1,219 '' |