BaerCoil Wire Thread Inserts M 10 x 1.5 - 2.0 D (20 mm) - free running - AISI 316 - 100 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 10 x 1.5 - 2.0 D (20 mm) - free running - AISI 316 - 100 pcs.
BaerCoil® wire thread inserts provide a long-lasting and powerful connection in the thread repair. The inserts also create load-bearing connections in materials with low shear strength. thread inserts are precise and wear-resistant and hold your screw firmly in place without changing the thread insert. Ideal for repairing stripped or worn threads. wire thread inserts is commonly found in automotive, electrical, medical, lightweight construction and aerospace applications.
For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. This thread is often also called STI thread (STI=Screw Thread Insert).
Our thread inserts ensure that both static and dynamic work loads are distributed in a balanced manner over the individual thread turns. The flexibility of the thread inserts also compensates for any pitch and angular errors, so that optimum force transmission from the bolt to the nut thread is achieved. Especially in lightweight constructions, BaerCoil® thread inserts help to reduce the carrier material and to use smaller or shorter screw connections. Today, they are already an important component in aviation and vehicle construction. They significantly save material and contribute to the conservation of resources.
BaerCoil® thread inserts can be shortened according to the required length with a side cutter or similar.
Dimensions
| Diameter |
10 |
|---|---|
| Pitch |
1,5 |
| Dimension |
M 10 x 1,5 |
| Length |
2,0 D |
| T (Length when installed) |
20 mm |
| Thread length calculation |
2.0 D means 2 times the diameter: 2 times 10 mm=20 mm The nominal diameter for M 10 is 10 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V4A (AISI 316, X5CrNiMo17-12-2, Material No.: 1.4401) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
Applications in seawater and chlorinated water
Attributes
- improved corrosion resistance
- reduced thread friction
- for high-alloy CrNi steel screws
Technical drawing
| Diameter |
10 |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
20 mm |
| F (Min. - Max. outside diameter of thread insert) |
11,74 mm - 12,50 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
25,25 mm |
| D (minimum depth of the core hole, without tip) |
26,75 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Login