BaerCoil Wire Thread Inserts M 18 x 1.5 - 1.0 D (18 mm) - free running - 25 pcs.
BaerCoil Wire Thread Inserts M 18 x 1.5 - 1.0 D (18 mm) - free running - 25 pcs.
BaerCoil® thread inserts are the best solution for your thread repair! With them you can create long-lasting and powerful threaded connections. The inserts also ensure that you have no waste and recycle everything. The inserts are precise and wear resistant - your screw will stay firmly in place without the thread insert slipping.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) is cut for the wire- thread insert.
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
18 |
|---|---|
| Pitch |
1,5 |
| Dimension |
MF 18 x 1,5 |
| Length |
1,0 D |
| T (Length when installed) |
18 mm |
| Thread length calculation |
1.0 D means 1 times the diameter: 1 times 18 mm=18 mm The nominal diameter for MF 18 is 18 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
18 |
|---|---|
| Length |
1,0 D |
| T (Length when installed) |
18 mm |
| F (Min. - Max. outside diameter of thread insert) |
19,75 mm - 21,85 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
23,25 mm |
| D (minimum depth of the core hole, without tip) |
24,75 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Zubehör
