BaerCoil Wire Thread Inserts M 18 x 1.5 - 2.5 D (45 mm) - free running - 25 pcs.
In stock
Express shipping available
BaerCoil Wire Thread Inserts M 18 x 1.5 - 2.5 D (45 mm) - free running - 25 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads - with the same nominal diameter! For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. This thread is often also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread, even in lightweight constructions. Today, they are already an important component in aviation and vehicle construction.
BaerCoil® thread inserts can be shortened to the required length with a side cutter or similar.
Dimensions
| Diameter |
18 |
|---|---|
| Pitch |
1,5 |
| Dimension |
MF 18 x 1,5 |
| Length |
2,5 D |
| T (Length when installed) |
45 mm |
| Thread length calculation |
2.5 D means 2.5 times the diameter: 2.5 times 18 mm=45 mm The nominal diameter for MF 18 is 18 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
18 |
|---|---|
| Length |
2,5 D |
| T (Length when installed) |
45 mm |
| F (Min. - Max. outside diameter of thread insert) |
19,75 mm - 21,85 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
50,25 mm |
| D (minimum depth of the core hole, without tip) |
51,75 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Login
Zubehör
