BaerCoil Wire Thread Inserts M 18 x 2.0 - 3.0 D (54 mm) - free running - 25 pcs.
€113.45*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 18 x 2.0 - 3.0 D (54 mm) - free running - 25 pcs.
BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful thread connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads - with the same nominal diameter! For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. This thread is often also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts ensure optimum power transmission from the bolt to the nut thread - even in lightweight constructions. Due to their flexibility, they can compensate for pitch and angle errors and thus guarantee optimum power transmission. BaerCoil® thread inserts are already important components in the aerospace and automotive industries and help to reduce carrier material and use smaller, shorter bolted joints.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
18 |
|---|---|
| Pitch |
2,0 |
| Dimension |
MF 18 x 2,0 |
| Length |
3,0 D |
| T (Length when installed) |
54 mm |
| Thread length calculation |
3.0 D means 3 times the diameter: 3 times 18 mm=54 mm The nominal diameter for MF 18 is 18 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1400 N/mm² |
| Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
| Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
| Diameter |
18 |
|---|---|
| Length |
3,0 D |
| T (Length when installed) |
54 mm |
| F (Min. - Max. outside diameter of thread insert) |
20,31 mm - 21,85 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
61,00 mm |
| D (minimum depth of the core hole, without tip) |
63,00 mm |
Video instructions
Further information
Product data sheet
Zubehör
