BaerCoil Wire Thread Inserts M 22 x 2.0 - 3.0 D (66 mm) - free running - 25 pcs.
€200.30*
Prices incl. VAT plus shipping costs
In stock
Express shipping is also possible for this product
BaerCoil Wire Thread Inserts M 22 x 2.0 - 3.0 D (66 mm) - free running - 25 pcs.
BaerCoil® wire thread inserts provide a durable and powerful threaded connection in the thread repair. The inserts also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight construction and aerospace. BaerCoil® wire thread inserts are the perfect solution for a long-lasting, powerful threaded connection and scrap recovery. They also create load-bearing connections in materials with low shear strength and are precise and wear-resistant. wire thread inserts are frequently used in automotive, electrical engineering, medical technology, lightweight constructions as well as in aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads - with the same nominal diameter! For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) for the wire thread insert is cut. Often this thread is also called STI thread (STI=Screw Thread Insert).
BaerCoil® thread inserts are perfect for applications where a balanced distribution of forces is required. They can withstand both static and dynamic loads and help save support material.
BaerCoil® thread inserts can be shortened to the required length with a side cutter or similar.
Dimensions
Diameter |
22 |
---|---|
Pitch |
2,0 |
Dimension |
MF 22 x 2,0 |
Length |
3,0 D |
T (Length when installed) |
66 mm |
Thread length calculation |
3.0 D means 3 times the diameter: 3 times 22 mm=66 mm The nominal diameter for MF 22 is 22 mm |
Characteristics
Product group |
Wire thread inserts |
---|---|
Product type |
BaerCoil wire thread inserts |
Thread standard |
MF: Metric ISO fine thread according to DIN 13 |
Tolerance |
ISO2/6H |
Direction |
Right |
Type |
free running |
Tensile strength at room temperature |
>1400 N/mm² |
Material |
Stainless Steel V2A (AISI 304, X5CrNi18-10, Material No.: 1.4301) |
Temperature resistance |
315°C long-term 425°C short-term |
Applications
All normal uses for thread repair and thread reinforcement
Technical drawing
Diameter |
22 |
---|---|
Length |
3,0 D |
T (Length when installed) |
66 mm |
F (Min. - Max. outside diameter of thread insert) |
24,31 mm - 26,50 mm |
P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
B (thread depth with chamfer) |
73,00 mm |
D (minimum depth of the core hole, without tip) |
75,00 mm |