BaerCoil Wire Thread Inserts M 5 x 0.8 - 2.0 D (10 mm) - free running - Inconel X750 - 100 pcs.
BaerCoil Wire Thread Inserts M 5 x 0.8 - 2.0 D (10 mm) - free running - Inconel X750 - 100 pcs.
BaerCoil® wire thread inserts are the perfect solution for a durable, powerful threaded connection and With the BaerCoil® wire thread inserts you create perfect, durable and powerful threaded connections. At the same time, the use of wire thread inserts allows for scrap recovery and load-bearing connections in materials with low shear strength. Therefore, wire thread inserts is often used in automotive, electrical engineering, medical technology, lightweight construction and aerospace.
The BaerCoil® thread insert is the perfect solution for damaged threads. For thread repair with wire thread inserts, the thread is drilled out and a new STI thread (screw thread insert) is cut for the wire- thread insert.
BaerCoil® thread inserts are essential for optimal power transmission in lightweight constructions. They ensure that both static and dynamic work loads are distributed in a balanced manner to the individual thread turns. Also, the flexibility of the thread inserts compensates for any pitch and angle errors. BaerCoil® thread inserts not only save time and money, but are also much lighter and more compact than conventional screw connections.
BaerCoil® thread inserts can be shortened, according to the required length, with a side cutter or similar.
Dimensions
| Diameter |
5 |
|---|---|
| Pitch |
0,8 |
| Dimension |
M 5 x 0,8 |
| Length |
2,0 D |
| T (Length when installed) |
10 mm |
| Thread length calculation | 2.0 D means 2 times the diameter: 2 times 5 mm=10 mm The nominal diameter for M 5 is 5 mm |
Characteristics
| Product group |
Wire thread inserts |
|---|---|
| Product type |
BaerCoil wire thread inserts |
| Thread standard |
M: Metric ISO standard thread according to DIN 13 |
| Tolerance |
ISO2/6H |
| Direction |
Right |
| Type |
free running |
| Tensile strength at room temperature |
>1150 N/mm² |
| Material |
Inconel X750 (NiCr15Fe7TiAl, material no.: 2.4669) |
| Temperature resistance |
550°C long-term 750°C short-term |
Applications
- Aerospace
- Turbocharger
- Aircraft engines
- Turbines
- Thermal power plants
Attributes
- high thermal resistance
- high corrosion protection
Technical drawing
| Diameter |
5 |
|---|---|
| Length |
2,0 D |
| T (Length when installed) |
10 mm |
| F (Min. - Max. outside diameter of thread insert) |
5,94 mm - 6,80 mm |
| P (depth) |
The thread insert must sit 1/4 - 1/2 turns below the surface |
| B (thread depth with chamfer) |
12,80 mm |
| D (minimum depth of the core hole, without tip) |
13,60 mm |
Video instructions
Further information
Product data sheet
Safety instructions
Login